Re: [PATCH 3/6] drm/bridge: tc358775: Add jeida-24 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> The jeida-24 register values are the default hardware settings, but they
> not listed in the driver. Let's add them.

jeida-24 and jeida-18 should have the same mapping, jeida-18 is broken in
this driver. could you test this patch:

--snip--

>From 46da1d76d4908e5879ed746cce1faeacd69c432e Mon Sep 17 00:00:00 2001
From: Michael Walle <mwalle@xxxxxxxxxx>
Date: Wed, 4 Oct 2023 13:52:57 +0200
Subject: [PATCH] drm/bridge: tc358775: fix support for jeida-18 and jeida-24

The bridge always uses 24bpp internally. Therefore, for jeida-18
mapping we need to discard the lowest two bits for each channel and thus
starting with LV_[RGB]2. jeida-24 has the same mapping but uses four
lanes instead of three, with the forth pair transmitting the lowest two
bits of each channel. Thus, the mapping between jeida-18 and jeida-24
is actually the same, except that one channel is turned off (by
selecting the RGB666 format in VPCTRL).

While at it, remove the bogus comment about the hardware default because
the default is overwritten in any case.

Tested with a jeida-18 display (Evervision VGG644804).

Fixes: b26975593b17 ("display/drm/bridge: TC358775 DSI/LVDS driver")
Signed-off-by: Michael Walle <mwalle@xxxxxxxxxx>
---
 drivers/gpu/drm/bridge/tc358775.c | 21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/bridge/tc358775.c b/drivers/gpu/drm/bridge/tc358775.c
index 90a89d70d832..592c69c2aedc 100644
--- a/drivers/gpu/drm/bridge/tc358775.c
+++ b/drivers/gpu/drm/bridge/tc358775.c
@@ -454,10 +454,6 @@ static void tc_bridge_enable(struct drm_bridge *bridge)
 	dev_dbg(tc->dev, "bus_formats %04x bpc %d\n",
 		connector->display_info.bus_formats[0],
 		tc->bpc);
-	/*
-	 * Default hardware register settings of tc358775 configured
-	 * with MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA jeida-24 format
-	 */
 	if (connector->display_info.bus_formats[0] ==
 		MEDIA_BUS_FMT_RGB888_1X7X4_SPWG) {
 		/* VESA-24 */
@@ -468,14 +464,15 @@ static void tc_bridge_enable(struct drm_bridge *bridge)
 		d2l_write(tc->i2c, LV_MX1619, LV_MX(LVI_B6, LVI_B7, LVI_B1, LVI_B2));
 		d2l_write(tc->i2c, LV_MX2023, LV_MX(LVI_B3, LVI_B4, LVI_B5, LVI_L0));
 		d2l_write(tc->i2c, LV_MX2427, LV_MX(LVI_HS, LVI_VS, LVI_DE, LVI_R6));
-	} else { /*  MEDIA_BUS_FMT_RGB666_1X7X3_SPWG - JEIDA-18 */
-		d2l_write(tc->i2c, LV_MX0003, LV_MX(LVI_R0, LVI_R1, LVI_R2, LVI_R3));
-		d2l_write(tc->i2c, LV_MX0407, LV_MX(LVI_R4, LVI_L0, LVI_R5, LVI_G0));
-		d2l_write(tc->i2c, LV_MX0811, LV_MX(LVI_G1, LVI_G2, LVI_L0, LVI_L0));
-		d2l_write(tc->i2c, LV_MX1215, LV_MX(LVI_G3, LVI_G4, LVI_G5, LVI_B0));
-		d2l_write(tc->i2c, LV_MX1619, LV_MX(LVI_L0, LVI_L0, LVI_B1, LVI_B2));
-		d2l_write(tc->i2c, LV_MX2023, LV_MX(LVI_B3, LVI_B4, LVI_B5, LVI_L0));
-		d2l_write(tc->i2c, LV_MX2427, LV_MX(LVI_HS, LVI_VS, LVI_DE, LVI_L0));
+	} else {
+		/* JEIDA-18 and JEIDA-24 */
+		d2l_write(tc->i2c, LV_MX0003, LV_MX(LVI_R2, LVI_R3, LVI_R4, LVI_R5));
+		d2l_write(tc->i2c, LV_MX0407, LV_MX(LVI_R6, LVI_R1, LVI_R7, LVI_G2));
+		d2l_write(tc->i2c, LV_MX0811, LV_MX(LVI_G3, LVI_G4, LVI_G0, LVI_G1));
+		d2l_write(tc->i2c, LV_MX1215, LV_MX(LVI_G5, LVI_G6, LVI_G7, LVI_B2));
+		d2l_write(tc->i2c, LV_MX1619, LV_MX(LVI_B0, LVI_B1, LVI_B3, LVI_B4));
+		d2l_write(tc->i2c, LV_MX2023, LV_MX(LVI_B5, LVI_B6, LVI_B7, LVI_L0));
+		d2l_write(tc->i2c, LV_MX2427, LV_MX(LVI_HS, LVI_VS, LVI_DE, LVI_R0));
 	}
 
 	d2l_write(tc->i2c, VFUEN, VFUEN_EN);
-- 
2.39.2





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux