Hi, > The tc358765 is similar to tc358775 except for the stdby-gpios. Bad timing (for me). I'm about to send a bigger patch series for the tc358775 which fixes the (completely) broken initialialization. And also contains some of your fixes. That being said, I intend to make the standby gpio optional also for the tc358755, because it might just be hardwired on the board. But second, I'm really curious if this bridge is working for you correctly as it is at the moment. One particular thing I've noticed is that you must release the reset while both the clock and the data lanes are in LP11 mode. Otherwise, the bridge won't work properly (i.e. horizontally shifted picture, or no picture at all). What DSI host controller are you using? -michael
