On Wed, Oct 25, 2023 at 07:50:58PM +0300, Laurent Pinchart wrote: > Add a DT overlay for the Variscite i.MX8MP DT8MCustomBoard that models > the GKTW70SDAE4SE LVDS panel found in the evaluation kit. > > Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> It doesn't apply to imx/dt64 branch, and I managed to manually apply it. However, here is what I'm getting from 'make ARCH=arm64 dtbs'. ../arch/arm64/boot/dts/freescale/imx8mp-var-dart-panel-gktw70sdae4se.dtso:54.3-16: Warning (reg_format): /fragment@1/__overlay__/touch@38:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) arch/arm64/boot/dts/freescale/imx8mp-var-dart-panel-gktw70sdae4se.dtbo: Warning (pci_device_reg): Failed prerequisite 'reg_format' arch/arm64/boot/dts/freescale/imx8mp-var-dart-panel-gktw70sdae4se.dtbo: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' arch/arm64/boot/dts/freescale/imx8mp-var-dart-panel-gktw70sdae4se.dtbo: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' arch/arm64/boot/dts/freescale/imx8mp-var-dart-panel-gktw70sdae4se.dtbo: Warning (spi_bus_reg): Failed prerequisite 'reg_format' ../arch/arm64/boot/dts/freescale/imx8mp-var-dart-panel-gktw70sdae4se.dtso:52.11-68.4: Warning (avoid_default_addr_size): /fragment@1/__overlay__/touch@38: Relying on default #address-cells value ../arch/arm64/boot/dts/freescale/imx8mp-var-dart-panel-gktw70sdae4se.dtso:52.11-68.4: Warning (avoid_default_addr_size): /fragment@1/__overlay__/touch@38: Relying on default #size-cells value arch/arm64/boot/dts/freescale/imx8mp-var-dart-panel-gktw70sdae4se.dtbo: Warning (graph_port): /fragment@3: graph port node name should be 'port' ../arch/arm64/boot/dts/freescale/imx8mp-var-dart-panel-gktw70sdae4se.dtso:85.15-87.3: Warning (graph_endpoint): /fragment@3/__overlay__: graph endpoint node name should be 'endpoint' ../arch/arm64/boot/dts/freescale/imx8mp-var-dart-panel-gktw70sdae4se.dtso:85.15-87.3: Warning (graph_endpoint): /fragment@3/__overlay__: graph connection to node '/fragment@0/__overlay__/panel/port/endpoint' is not bidirectional Shawn
