On Fri, Oct 20, 2023 at 05:30:22PM +0200, Andrejs Cainikovs wrote:
> From: Andrejs Cainikovs <andrejs.cainikovs@xxxxxxxxxxx>
>
> Newer variants of Ixora boards require a power-up delay when powering up
> the CAN transceiver of up to 1ms.
>
> Cc: stable@xxxxxxxxxxxxxxx
Why is only the iMX6 change required for stable?
Shawn
> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@xxxxxxxxxxx>
> ---
> arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
> index 717decda0ceb..3ac7a4501620 100644
> --- a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
> +++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
> @@ -76,6 +76,7 @@ reg_can1_supply: regulator-can1-supply {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_enable_can1_power>;
> regulator-name = "can1_supply";
> + startup-delay-us = <1000>;
> };
>
> reg_can2_supply: regulator-can2-supply {
> @@ -85,6 +86,7 @@ reg_can2_supply: regulator-can2-supply {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_enable_can2_power>;
> regulator-name = "can2_supply";
> + startup-delay-us = <1000>;
> };
> };
>
> --
> 2.34.1
>
