From: Chen Wang <unicorn_wang@xxxxxxxxxxx>
Add a driver for the SOPHGO SG2042 clock generator.
Signed-off-by: Chen Wang <unicorn_wang@xxxxxxxxxxx>
---
MAINTAINERS | 7 +
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/sophgo/Kconfig | 8 +
drivers/clk/sophgo/Makefile | 2 +
drivers/clk/sophgo/clk-sophgo-sg2042.c | 1357 ++++++++++++++++++++++++
drivers/clk/sophgo/clk-sophgo-sg2042.h | 222 ++++
7 files changed, 1598 insertions(+)
create mode 100644 drivers/clk/sophgo/Kconfig
create mode 100644 drivers/clk/sophgo/Makefile
create mode 100644 drivers/clk/sophgo/clk-sophgo-sg2042.c
create mode 100644 drivers/clk/sophgo/clk-sophgo-sg2042.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 97f51d5ec1cf..93187d59b498 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20269,6 +20269,13 @@ S: Maintained
F: arch/riscv/boot/dts/sophgo/
F: Documentation/devicetree/bindings/riscv/sophgo.yaml
+SOPHGO CLOCK DRIVER
+M: Chen Wang <unicorn_wang@xxxxxxxxxxx>
+S: Maintained
+F: Documentation/devicetree/bindings/clock/sophgo/
+F: drivers/clk/sophgo/
+F: include/dt-bindings/clock/sophgo-sg2042-clk.h
+
SOUND
M: Jaroslav Kysela <perex@xxxxxxxx>
M: Takashi Iwai <tiwai@xxxxxxxx>
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index c30d0d396f7a..514343934fda 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -499,6 +499,7 @@ source "drivers/clk/rockchip/Kconfig"
source "drivers/clk/samsung/Kconfig"
source "drivers/clk/sifive/Kconfig"
source "drivers/clk/socfpga/Kconfig"
+source "drivers/clk/sophgo/Kconfig"
source "drivers/clk/sprd/Kconfig"
source "drivers/clk/starfive/Kconfig"
source "drivers/clk/sunxi/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index ed71f2e0ee36..aa5d2cf0b6a6 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -119,6 +119,7 @@ obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
obj-$(CONFIG_COMMON_CLK_SAMSUNG) += samsung/
obj-$(CONFIG_CLK_SIFIVE) += sifive/
obj-y += socfpga/
+obj-$(CONFIG_ARCH_SOPHGO) += sophgo/
obj-$(CONFIG_PLAT_SPEAR) += spear/
obj-y += sprd/
obj-$(CONFIG_ARCH_STI) += st/
diff --git a/drivers/clk/sophgo/Kconfig b/drivers/clk/sophgo/Kconfig
new file mode 100644
index 000000000000..b0fbe4499870
--- /dev/null
+++ b/drivers/clk/sophgo/Kconfig
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config CLK_SOPHGO_SG2042
+ bool "Sophgo SG2042 clock support"
+ depends on ARCH_SOPHGO || COMPILE_TEST
+ default ARCH_SOPHGO
+ help
+ Say yes here to support the clock controller on the Sophgo SG2042 SoC.
diff --git a/drivers/clk/sophgo/Makefile b/drivers/clk/sophgo/Makefile
new file mode 100644
index 000000000000..13834cce260c
--- /dev/null
+++ b/drivers/clk/sophgo/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_CLK_SOPHGO_SG2042) += clk-sophgo-sg2042.o
diff --git a/drivers/clk/sophgo/clk-sophgo-sg2042.c b/drivers/clk/sophgo/clk-sophgo-sg2042.c
new file mode 100644
index 000000000000..e8cd06a72b81
--- /dev/null
+++ b/drivers/clk/sophgo/clk-sophgo-sg2042.c
@@ -0,0 +1,1357 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Sophgo SG2042 Clock Generator Driver
+ *
+ * Copyright (C) 2023 Sophgo Technology Inc. All rights reserved.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+
+#include <dt-bindings/clock/sophgo-sg2042-clk.h>
+
+#include "clk-sophgo-sg2042.h"
+
+#define div_mask(width) ((1 << (width)) - 1)
+#define ENCODE_PLL_CTRL(fbdiv, p1, p2, refdiv) \
+ (((fbdiv & 0xfff) << 16) | ((p2 & 0x7) << 12) | ((p1 & 0x7) << 8) | (refdiv & 0x3f))
+
+static inline int __sg2042_pll_enable(struct sg2042_pll_clock *pll, bool en)
+{
+ unsigned int value = 0;
+ unsigned long enter;
+ struct regmap *map = pll->map;
+
+ if (en) {
+ /* wait pll lock */
+ enter = jiffies;
+ regmap_read(map, pll->offset_status, &value);
+ while (!((value >> pll->shift_status_lock) & 0x1)) {
+ regmap_read(map, pll->shift_status_lock, &value);
+ if (time_after(jiffies, enter + HZ / 10))
+ pr_warn("%s not locked\n", pll->name);
+ }
+ /* wait pll updating */
+ enter = jiffies;
+ regmap_read(map, pll->shift_status_updating, &value);
+ while (((value >> pll->shift_status_updating) & 0x1)) {
+ regmap_read(map, pll->shift_status_updating, &value);
+ if (time_after(jiffies, enter + HZ / 10))
+ pr_warn("%s still updating\n", pll->name);
+ }
+ /* enable pll */
+ regmap_read(map, pll->offset_enable, &value);
+ regmap_write(map, pll->offset_enable, value | (1 << pll->shift_enable));
+ } else {
+ /* disable pll */
+ regmap_read(map, pll->offset_enable, &value);
+ regmap_write(map, pll->offset_enable, value & (~(1 << pll->shift_enable)));
+ }
+
+ return 0;
+}
+
+static unsigned int __sg2042_get_table_div(
+ const struct clk_div_table *table,
+ unsigned int val)
+{
+ const struct clk_div_table *clkt;
+
+ for (clkt = table; clkt->div; clkt++)
+ if (clkt->val == val)
+ return clkt->div;
+ return 0;
+}
+
+static unsigned int __sg2042_get_div(
+ const struct clk_div_table *table,
+ unsigned int val,
+ unsigned long flags, u8 width)
+{
+ if (flags & CLK_DIVIDER_ONE_BASED)
+ return val;
+ if (flags & CLK_DIVIDER_POWER_OF_TWO)
+ return 1 << val;
+ if (flags & CLK_DIVIDER_MAX_AT_ZERO)
+ return val ? val : div_mask(width) + 1;
+ if (table)
+ return __sg2042_get_table_div(table, val);
+ return val + 1;
+}
+
+/*
+ * @reg_value: current register value
+ * @parent_rate: parent frequency
+ *
+ * This function is used to calculate below "rate" in equation
+ * rate = (parent_rate/REFDIV) x FBDIV/POSTDIV1/POSTDIV2
+ * = (parent_rate x FBDIV) / (REFDIV x POSTDIV1 x POSTDIV2)
+ */
+static unsigned long __sg2042_pll_recalc_rate(
+ unsigned int reg_value,
+ unsigned long parent_rate)
+{
+ unsigned int fbdiv, refdiv;
+ unsigned int postdiv1, postdiv2;
+ u64 rate, numerator, denominator;
+
+ fbdiv = (reg_value >> 16) & 0xfff;
+ refdiv = reg_value & 0x3f;
+ postdiv1 = (reg_value >> 8) & 0x7;
+ postdiv2 = (reg_value >> 12) & 0x7;
+
+ numerator = parent_rate * fbdiv;
+ denominator = refdiv * postdiv1 * postdiv2;
+ do_div(numerator, denominator);
+ rate = numerator;
+
+ return rate;
+}
+
+/*
+ * Below array is the total combination lists of POSTDIV1 and POSTDIV2
+ * for example:
+ * postdiv1_2[0] = {2, 4, 8}
+ * ==> div1 = 2, div2 = 4 , div1 * div2 = 8
+ * And POSTDIV_RESULT_INDEX point to 3rd element in the array
+ */
+#define POSTDIV_RESULT_INDEX 2
+static int postdiv1_2[][3] = {
+ {2, 4, 8}, {3, 3, 9}, {2, 5, 10}, {2, 6, 12},
+ {2, 7, 14}, {3, 5, 15}, {4, 4, 16}, {3, 6, 18},
+ {4, 5, 20}, {3, 7, 21}, {4, 6, 24}, {5, 5, 25},
+ {4, 7, 28}, {5, 6, 30}, {5, 7, 35}, {6, 6, 36},
+ {6, 7, 42}, {7, 7, 49}
+};
+
+/*
+ * Based on input rate/prate/fbdiv/refdiv, look up the postdiv1_2 table
+ * to get the closest postdiiv combination.
+ * @rate: FOUTPOSTDIV
+ * @prate: parent rate, i.e. FREF
+ * @fbdiv: FBDIV
+ * @refdiv: REFDIV
+ * @postdiv1: POSTDIV1, output
+ * @postdiv2: POSTDIV2, output
+ * See TRM:
+ * FOUTPOSTDIV = FREF * FBDIV / REFDIV / (POSTDIV1 * POSTDIV2)
+ * So we get following formula to get POSTDIV1 and POSTDIV2:
+ * POSTDIV = (prate/REFDIV) x FBDIV/rate
+ * above POSTDIV = POSTDIV1*POSTDIV2
+ */
+static int __sg2042_pll_get_postdiv_1_2(
+ unsigned long rate,
+ unsigned long prate,
+ unsigned int fbdiv,
+ unsigned int refdiv,
+ unsigned int *postdiv1,
+ unsigned int *postdiv2)
+{
+ int index = 0;
+ int ret = 0;
+ u64 tmp0;
+
+ /* prate/REFDIV and result save to tmp0 */
+ tmp0 = prate;
+ do_div(tmp0, refdiv);
+
+ /* ((prate/REFDIV) x FBDIV) and result save to tmp0 */
+ tmp0 *= fbdiv;
+
+ /* ((prate/REFDIV) x FBDIV)/rate and result save to tmp0 */
+ do_div(tmp0, rate);
+
+ /* tmp0 is POSTDIV1*POSTDIV2, now we calculate div1 and div2 value */
+ if (tmp0 <= 7) {
+ /* (div1 * div2) <= 7, no need to use array search */
+ *postdiv1 = tmp0;
+ *postdiv2 = 1;
+ } else {
+ /* (div1 * div2) > 7, use array search */
+ for (index = 0; index < ARRAY_SIZE(postdiv1_2); index++) {
+ if (tmp0 > postdiv1_2[index][POSTDIV_RESULT_INDEX]) {
+ continue;
+ } else {
+ /* found it */
+ break;
+ }
+ }
+ if (index < ARRAY_SIZE(postdiv1_2)) {
+ *postdiv1 = postdiv1_2[index][1];
+ *postdiv2 = postdiv1_2[index][0];
+ } else {
+ pr_debug("%s can not find in postdiv array!\n", __func__);
+ ret = -EINVAL;
+ }
+ }
+
+ return ret;
+}
+
+#define KHZ 1000UL
+#define MHZ (KHZ * KHZ)
+
+#define REFDIV_MIN 1
+#define REFDIV_MAX 63
+#define FBDIV_MIN 16
+#define FBDIV_MAX 320
+
+#define PLL_FREF_SG2042 (25 * MHZ)
+
+#define PLL_FOUTPOSTDIV_MIN (16 * MHZ)
+#define PLL_FOUTPOSTDIV_MAX (3200 * MHZ)
+
+#define PLL_FOUTVCO_MIN (800 * MHZ)
+#define PLL_FOUTVCO_MAX (3200 * MHZ)
+
+struct sg2042_pll_ctrl {
+ unsigned long freq;
+ unsigned int fbdiv;
+ unsigned int postdiv1;
+ unsigned int postdiv2;
+ unsigned int refdiv;
+};
+
+/*
+ * Based on the given FOUTPISTDIV and the input FREF to calculate
+ * the REFDIV/FBDIV/PSTDIV1/POSTDIV2 combination for pllctrl register.
+ * @req_rate: expected output clock rate, i.e. FOUTPISTDIV
+ * @parent_rate: input parent clock rate, i.e. FREF
+ * @best: output to hold calculated combination of REFDIV/FBDIV/PSTDIV1/POSTDIV2
+ */
+static int __sg2042_get_pll_ctl_setting(
+ struct sg2042_pll_ctrl *best,
+ unsigned long req_rate,
+ unsigned long parent_rate)
+{
+ int ret;
+ unsigned int fbdiv, refdiv, postdiv1, postdiv2;
+ unsigned long foutpostdiv;
+ u64 tmp;
+ u64 foutvco;
+
+ if (parent_rate != PLL_FREF_SG2042) {
+ pr_alert("INVALID FREF: %ld\n", parent_rate);
+ return -EINVAL;
+ }
+
+ if (req_rate < PLL_FOUTPOSTDIV_MIN || req_rate > PLL_FOUTPOSTDIV_MAX) {
+ pr_alert("INVALID FOUTPOSTDIV: %ld\n", req_rate);
+ return -EINVAL;
+ }
+
+ memset(best, 0, sizeof(struct sg2042_pll_ctrl));
+
+ for (refdiv = REFDIV_MIN; refdiv < REFDIV_MAX + 1; refdiv++) {
+ /* required by hardware: FREF/REFDIV must > 10 */
+ tmp = parent_rate;
+ do_div(tmp, refdiv);
+ if (tmp <= 10)
+ continue;
+
+ for (fbdiv = FBDIV_MIN; fbdiv < FBDIV_MAX + 1; fbdiv++) {
+ /*
+ * FOUTVCO = FREF*FBDIV/REFDIV validation
+ * required by hardware, FOUTVCO must [800MHz, 3200MHz]
+ */
+ foutvco = parent_rate * fbdiv;
+ do_div(foutvco, refdiv);
+ if (foutvco < PLL_FOUTVCO_MIN || foutvco > PLL_FOUTVCO_MAX)
+ continue;
+
+ ret = __sg2042_pll_get_postdiv_1_2(
+ req_rate, parent_rate, fbdiv, refdiv,
+ &postdiv1, &postdiv2);
+ if (ret)
+ continue;
+
+ /*
+ * FOUTPOSTDIV = FREF*FBDIV/REFDIV/(POSTDIV1*POSTDIV2)
+ * = FOUTVCO/(POSTDIV1*POSTDIV2)
+ */
+ tmp = foutvco;
+ do_div(tmp, (postdiv1 * postdiv2));
+ foutpostdiv = (unsigned long)tmp;
+ /* Iterative to approach the expected value */
+ if (abs_diff(foutpostdiv, req_rate) <
+ abs_diff(best->freq, req_rate)) {
+ best->freq = foutpostdiv;
+ best->refdiv = refdiv;
+ best->fbdiv = fbdiv;
+ best->postdiv1 = postdiv1;
+ best->postdiv2 = postdiv2;
+ if (foutpostdiv == req_rate)
+ return 0;
+ }
+ continue;
+ }
+ }
+
+ if (best->freq == 0)
+ return -EINVAL;
+ else
+ return 0;
+}
+
+/*
+ * @hw: ccf use to hook get sg2042_pll_clock
+ * @parent_rate: parent rate
+ *
+ * The is function will be called through clk_get_rate
+ * and return current rate after decoding reg value
+ */
+static unsigned long sg2042_clk_pll_recalc_rate(
+ struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ unsigned int value;
+ unsigned long rate;
+ struct sg2042_pll_clock *pll = to_sg2042_pll_clk(hw);
+
+ regmap_read(pll->map, pll->offset_ctrl, &value);
+ rate = __sg2042_pll_recalc_rate(value, parent_rate);
+
+ pr_debug("--> %s: pll_recalc_rate: val = %ld\n",
+ clk_hw_get_name(hw), rate);
+ return rate;
+}
+
+static long sg2042_clk_pll_round_rate(
+ struct clk_hw *hw,
+ unsigned long req_rate,
+ unsigned long *prate)
+{
+ unsigned int value;
+ struct sg2042_pll_ctrl pctrl_table;
+ long proper_rate;
+ int ret;
+
+ ret = __sg2042_get_pll_ctl_setting(&pctrl_table, req_rate, *prate);
+ if (ret) {
+ proper_rate = 0;
+ goto out;
+ }
+
+ value = ENCODE_PLL_CTRL(pctrl_table.fbdiv, pctrl_table.postdiv1,
+ pctrl_table.postdiv2, pctrl_table.refdiv);
+ proper_rate = (long)__sg2042_pll_recalc_rate(value, *prate);
+
+out:
+ pr_debug("--> %s: pll_round_rate: val = %ld\n",
+ clk_hw_get_name(hw), proper_rate);
+ return proper_rate;
+}
+
+static int sg2042_clk_pll_determine_rate(
+ struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ req->rate = sg2042_clk_pll_round_rate(hw, min(req->rate, req->max_rate),
+ &req->best_parent_rate);
+ pr_debug("--> %s: pll_determine_rate: val = %ld\n",
+ clk_hw_get_name(hw), req->rate);
+ return 0;
+}
+
+static int sg2042_clk_pll_set_rate(
+ struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+ unsigned long flags;
+ unsigned int value;
+ int ret = 0;
+ struct sg2042_pll_ctrl pctrl_table;
+ struct sg2042_pll_clock *pll = to_sg2042_pll_clk(hw);
+
+ spin_lock_irqsave(pll->lock, flags);
+ if (__sg2042_pll_enable(pll, 0)) {
+ pr_warn("Can't disable pll(%s), status error\n", pll->name);
+ goto out;
+ }
+ ret = __sg2042_get_pll_ctl_setting(&pctrl_table, rate, parent_rate);
+ if (ret) {
+ pr_warn("%s: Can't find a proper pll setting\n", pll->name);
+ goto out2;
+ }
+
+ value = ENCODE_PLL_CTRL(pctrl_table.fbdiv, pctrl_table.postdiv1,
+ pctrl_table.postdiv2, pctrl_table.refdiv);
+
+ /* write the value to top register */
+ regmap_write(pll->map, pll->offset_ctrl, value);
+
+out2:
+ __sg2042_pll_enable(pll, 1);
+out:
+ spin_unlock_irqrestore(pll->lock, flags);
+
+ pr_debug("--> %s: pll_set_rate: val = 0x%x\n",
+ clk_hw_get_name(hw), value);
+ return ret;
+}
+
+static unsigned long sg2042_clk_divider_recalc_rate(
+ struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct sg2042_divider_clock *divider = to_sg2042_clk_divider(hw);
+ unsigned int val;
+ unsigned long ret_rate;
+
+ val = readl(divider->reg) >> divider->shift;
+ val &= div_mask(divider->width);
+
+ ret_rate = divider_recalc_rate(hw, parent_rate, val, divider->table,
+ divider->div_flags, divider->width);
+
+ pr_debug("--> %s: divider_recalc_rate: val = %ld\n",
+ clk_hw_get_name(hw), ret_rate);
+ return ret_rate;
+}
+
+static long sg2042_clk_divider_round_rate(
+ struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long *prate)
+{
+ int bestdiv;
+ unsigned long ret_rate;
+ struct sg2042_divider_clock *divider = to_sg2042_clk_divider(hw);
+
+ /* if read only, just return current value */
+ if (divider->div_flags & CLK_DIVIDER_READ_ONLY) {
+ bestdiv = readl(divider->reg) >> divider->shift;
+ bestdiv &= div_mask(divider->width);
+ bestdiv = __sg2042_get_div(divider->table, bestdiv, divider->div_flags,
+ divider->width);
+ ret_rate = DIV_ROUND_UP_ULL((u64)*prate, bestdiv);
+ } else {
+ ret_rate = divider_round_rate(hw, rate, prate, divider->table,
+ divider->width, divider->div_flags);
+ }
+
+ pr_debug("--> %s: divider_round_rate: val = %ld\n",
+ clk_hw_get_name(hw), ret_rate);
+ return ret_rate;
+}
+
+static int sg2042_clk_divider_set_rate(
+ struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+ unsigned int value;
+ unsigned int val, val2;
+ unsigned long flags = 0;
+ struct sg2042_divider_clock *divider = to_sg2042_clk_divider(hw);
+
+ value = divider_get_val(rate, parent_rate, divider->table,
+ divider->width, divider->div_flags);
+
+ if (divider->lock)
+ spin_lock_irqsave(divider->lock, flags);
+ else
+ __acquire(divider->lock);
+
+ /* div assert */
+ val = readl(divider->reg);
+ val &= ~0x1;
+ writel(val, divider->reg);
+
+ if (divider->div_flags & CLK_DIVIDER_HIWORD_MASK) {
+ val = div_mask(divider->width) << (divider->shift + 16);
+ } else {
+ val = readl(divider->reg);
+ val &= ~(div_mask(divider->width) << divider->shift);
+ }
+
+ val |= value << divider->shift;
+ writel(val, divider->reg);
+ val2 = val;
+
+ if (!(divider->div_flags & CLK_DIVIDER_READ_ONLY))
+ val |= 1 << 3;
+
+ /* de-assert */
+ val |= 1;
+ writel(val, divider->reg);
+ if (divider->lock)
+ spin_unlock_irqrestore(divider->lock, flags);
+ else
+ __release(divider->lock);
+
+ pr_debug("--> %s: divider_set_rate: register val = 0x%x\n",
+ clk_hw_get_name(hw), val2);
+ return 0;
+}
+
+static const struct clk_ops sg2042_clk_divider_ops = {
+ .recalc_rate = sg2042_clk_divider_recalc_rate,
+ .round_rate = sg2042_clk_divider_round_rate,
+ .set_rate = sg2042_clk_divider_set_rate,
+};
+
+static const struct clk_ops sg2042_clk_divider_ro_ops = {
+ .recalc_rate = sg2042_clk_divider_recalc_rate,
+ .round_rate = sg2042_clk_divider_round_rate,
+};
+
+static const struct clk_ops sg2042_clk_pll_ops = {
+ .recalc_rate = sg2042_clk_pll_recalc_rate,
+ .round_rate = sg2042_clk_pll_round_rate,
+ .determine_rate = sg2042_clk_pll_determine_rate,
+ .set_rate = sg2042_clk_pll_set_rate,
+};
+
+static const struct clk_ops sg2042_clk_pll_ro_ops = {
+ .recalc_rate = sg2042_clk_pll_recalc_rate,
+ .round_rate = sg2042_clk_pll_round_rate,
+};
+
+#define SG2042_PLL(_id, _name, _parent_name, _r_stat, _r_enable, _r_ctrl, _shift) \
+ { \
+ .hw.init = CLK_HW_INIT_PARENTS( \
+ _name, \
+ (const char *[]){_parent_name}, \
+ &sg2042_clk_pll_ops, \
+ CLK_GET_RATE_NOCACHE | CLK_GET_ACCURACY_NOCACHE),\
+ .id = _id, \
+ .name = _name, \
+ .offset_ctrl = _r_ctrl, \
+ .offset_status = _r_stat, \
+ .offset_enable = _r_enable, \
+ .shift_status_lock = 8 + _shift, \
+ .shift_status_updating = _shift, \
+ .shift_enable = _shift, \
+ }
+
+#define SG2042_PLL_RO(_id, _name, _parent_name, _r_stat, _r_enable, _r_ctrl, _shift) \
+ { \
+ .hw.init = CLK_HW_INIT_PARENTS( \
+ _name, \
+ (const char *[]){_parent_name}, \
+ &sg2042_clk_pll_ro_ops, \
+ CLK_GET_RATE_NOCACHE | CLK_GET_ACCURACY_NOCACHE),\
+ .id = _id, \
+ .name = _name, \
+ .offset_ctrl = _r_ctrl, \
+ .offset_status = _r_stat, \
+ .offset_enable = _r_enable, \
+ .shift_status_lock = 8 + _shift, \
+ .shift_status_updating = _shift, \
+ .shift_enable = _shift, \
+ }
+
+static struct sg2042_pll_clock sg2042_pll_clks[] = {
+ SG2042_PLL_RO(FPLL_CLK, "fpll_clock", "cgi",
+ R_PLL_STAT, R_PLL_CLKEN_CONTROL, R_FPLL_CONTROL, 3),
+ SG2042_PLL_RO(DPLL0_CLK, "dpll0_clock", "cgi",
+ R_PLL_STAT, R_PLL_CLKEN_CONTROL, R_DPLL0_CONTROL, 4),
+ SG2042_PLL_RO(DPLL1_CLK, "dpll1_clock", "cgi",
+ R_PLL_STAT, R_PLL_CLKEN_CONTROL, R_DPLL1_CONTROL, 5),
+ SG2042_PLL(MPLL_CLK, "mpll_clock", "cgi",
+ R_PLL_STAT, R_PLL_CLKEN_CONTROL, R_MPLL_CONTROL, 0),
+};
+
+#define SG2042_DIV(_id, _name, _parent_name, \
+ _r_ctrl, _shift, _width, \
+ _div_flag, _init_val) { \
+ .hw.init = CLK_HW_INIT_PARENTS( \
+ _name, \
+ (const char *[]){_parent_name}, \
+ &sg2042_clk_divider_ops, \
+ 0), \
+ .id = _id, \
+ .name = _name, \
+ .offset_ctrl = _r_ctrl, \
+ .shift = _shift, \
+ .width = _width, \
+ .div_flags = _div_flag, \
+ .initial_val = _init_val, \
+ .table = NULL, \
+ }
+
+#define SG2042_DIV_RO(_id, _name, _parent_name, \
+ _r_ctrl, _shift, _width, \
+ _div_flag, _init_val) { \
+ .hw.init = CLK_HW_INIT_PARENTS( \
+ _name, \
+ (const char *[]){_parent_name}, \
+ &sg2042_clk_divider_ro_ops, \
+ 0), \
+ .id = _id, \
+ .name = _name, \
+ .offset_ctrl = _r_ctrl, \
+ .shift = _shift, \
+ .width = _width, \
+ .div_flags = _div_flag, \
+ .initial_val = _init_val, \
+ .table = NULL, \
+ }
+
+/*
+ * DIV items in the array are sorted according to the clock-tree diagram,
+ * from top to bottom, from upstream to downstream. Read TRM for details.
+ */
+#define DEF_DIVFLAG (CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO)
+static struct sg2042_divider_clock sg2042_div_clks[] = {
+ SG2042_DIV_RO(DIV_CLK_DPLL0_DDR01_0,
+ "clk_div_ddr01_0", "clk_gate_ddr01_div0",
+ R_CLKDIVREG27, 16, 5,
+ DEF_DIVFLAG | CLK_DIVIDER_READ_ONLY, -1),
+ SG2042_DIV_RO(DIV_CLK_FPLL_DDR01_1,
+ "clk_div_ddr01_1", "clk_gate_ddr01_div1",
+ R_CLKDIVREG28, 16, 5,
+ DEF_DIVFLAG | CLK_DIVIDER_READ_ONLY, -1),
+
+ SG2042_DIV_RO(DIV_CLK_DPLL1_DDR23_0,
+ "clk_div_ddr23_0", "clk_gate_ddr23_div0",
+ R_CLKDIVREG29, 16, 5,
+ DEF_DIVFLAG | CLK_DIVIDER_READ_ONLY, -1),
+ SG2042_DIV_RO(DIV_CLK_FPLL_DDR23_1,
+ "clk_div_ddr23_1", "clk_gate_ddr23_div1",
+ R_CLKDIVREG30, 16, 5,
+ DEF_DIVFLAG | CLK_DIVIDER_READ_ONLY, -1),
+
+ SG2042_DIV(DIV_CLK_MPLL_RP_CPU_NORMAL_0,
+ "clk_div_rp_cpu_normal_0", "clk_gate_rp_cpu_normal_div0",
+ R_CLKDIVREG0, 16, 5, DEF_DIVFLAG, 0),
+ SG2042_DIV(DIV_CLK_FPLL_RP_CPU_NORMAL_1,
+ "clk_div_rp_cpu_normal_1", "clk_gate_rp_cpu_normal_div1",
+ R_CLKDIVREG1, 16, 5, DEF_DIVFLAG, 0),
+
+ SG2042_DIV(DIV_CLK_MPLL_AXI_DDR_0,
+ "clk_div_axi_ddr_0", "clk_gate_axi_ddr_div0",
+ R_CLKDIVREG25, 16, 5, DEF_DIVFLAG, 5),
+ SG2042_DIV(DIV_CLK_FPLL_AXI_DDR_1,
+ "clk_div_axi_ddr_1", "clk_gate_axi_ddr_div1",
+ R_CLKDIVREG26, 16, 5, DEF_DIVFLAG, 5),
+
+ SG2042_DIV(DIV_CLK_FPLL_TOP_RP_CMN_DIV2,
+ "clk_div_top_rp_cmn_div2", "clk_mux_rp_cpu_normal",
+ R_CLKDIVREG3, 16, 16, DEF_DIVFLAG, 0),
+
+ SG2042_DIV(DIV_CLK_FPLL_50M_A53, "clk_div_50m_a53", "fpll_clock",
+ R_CLKDIVREG2, 16, 8, DEF_DIVFLAG, 0),
+ /* downstream of div_50m_a53 */
+ SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER1, "clk_div_timer1", "clk_div_50m_a53",
+ R_CLKDIVREG6, 16, 16, DEF_DIVFLAG, 0),
+ SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER2, "clk_div_timer2", "clk_div_50m_a53",
+ R_CLKDIVREG7, 16, 16, DEF_DIVFLAG, 0),
+ SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER3, "clk_div_timer3", "clk_div_50m_a53",
+ R_CLKDIVREG8, 16, 16, DEF_DIVFLAG, 0),
+ SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER4, "clk_div_timer4", "clk_div_50m_a53",
+ R_CLKDIVREG9, 16, 16, DEF_DIVFLAG, 0),
+ SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER5, "clk_div_timer5", "clk_div_50m_a53",
+ R_CLKDIVREG10, 16, 16, DEF_DIVFLAG, 0),
+ SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER6, "clk_div_timer6", "clk_div_50m_a53",
+ R_CLKDIVREG11, 16, 16, DEF_DIVFLAG, 0),
+ SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER7, "clk_div_timer7", "clk_div_50m_a53",
+ R_CLKDIVREG12, 16, 16, DEF_DIVFLAG, 0),
+ SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER8, "clk_div_timer8", "clk_div_50m_a53",
+ R_CLKDIVREG13, 16, 16, DEF_DIVFLAG, 0),
+
+ SG2042_DIV_RO(DIV_CLK_FPLL_UART_500M, "clk_div_uart_500m", "fpll_clock",
+ R_CLKDIVREG4, 16, 7,
+ CLK_DIVIDER_READ_ONLY, 0),
+ SG2042_DIV(DIV_CLK_FPLL_AHB_LPC, "clk_div_ahb_lpc", "fpll_clock",
+ R_CLKDIVREG5, 16, 16, DEF_DIVFLAG, 0),
+ SG2042_DIV(DIV_CLK_FPLL_EFUSE, "clk_div_efuse", "fpll_clock",
+ R_CLKDIVREG14, 16, 7, DEF_DIVFLAG, 0),
+ SG2042_DIV(DIV_CLK_FPLL_TX_ETH0, "clk_div_tx_eth0", "fpll_clock",
+ R_CLKDIVREG16, 16, 11, DEF_DIVFLAG, 0),
+ SG2042_DIV(DIV_CLK_FPLL_PTP_REF_I_ETH0,
+ "clk_div_ptp_ref_i_eth0", "fpll_clock",
+ R_CLKDIVREG17, 16, 8, DEF_DIVFLAG, 0),
+ SG2042_DIV(DIV_CLK_FPLL_REF_ETH0, "clk_div_ref_eth0", "fpll_clock",
+ R_CLKDIVREG18, 16, 8, DEF_DIVFLAG, 0),
+ SG2042_DIV(DIV_CLK_FPLL_EMMC, "clk_div_emmc", "fpll_clock",
+ R_CLKDIVREG19, 16, 5, DEF_DIVFLAG, 0),
+ SG2042_DIV(DIV_CLK_FPLL_SD, "clk_div_sd", "fpll_clock",
+ R_CLKDIVREG21, 16, 5, DEF_DIVFLAG, 0),
+
+ SG2042_DIV(DIV_CLK_FPLL_TOP_AXI0, "clk_div_top_axi0", "fpll_clock",
+ R_CLKDIVREG23, 16, 5, DEF_DIVFLAG, 0),
+ /* downstream of div_top_axi0 */
+ SG2042_DIV(DIV_CLK_FPLL_100K_EMMC, "clk_div_100k_emmc", "clk_div_top_axi0",
+ R_CLKDIVREG20, 16, 16, DEF_DIVFLAG, 0),
+ SG2042_DIV(DIV_CLK_FPLL_100K_SD, "clk_div_100k_sd", "clk_div_top_axi0",
+ R_CLKDIVREG22, 16, 16, DEF_DIVFLAG, 0),
+ SG2042_DIV(DIV_CLK_FPLL_GPIO_DB, "clk_div_gpio_db", "clk_div_top_axi0",
+ R_CLKDIVREG15, 16, 16, DEF_DIVFLAG, 0),
+
+ SG2042_DIV(DIV_CLK_FPLL_TOP_AXI_HSPERI,
+ "clk_div_top_axi_hsperi", "fpll_clock",
+ R_CLKDIVREG24, 16, 5, DEF_DIVFLAG, 0),
+};
+
+#define SG2042_GATE(_id, _name, _parent_name, _flags, _r_enable, _bit_idx) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent_name, \
+ .flags = _flags, \
+ .offset_enable = _r_enable, \
+ .bit_idx = _bit_idx, \
+ }
+
+/*
+ * GATE items in the array are sorted according to the clock-tree diagram,
+ * from top to bottom, from upstream to downstream. Read TRM for details.
+ */
+static const struct sg2042_gate_clock sg2042_gate_clks[] = {
+ SG2042_GATE(GATE_CLK_DDR01_DIV0, "clk_gate_ddr01_div0", "dpll0_clock",
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ R_CLKDIVREG27, 4),
+ SG2042_GATE(GATE_CLK_DDR01_DIV1, "clk_gate_ddr01_div1", "fpll_clock",
+ CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
+ R_CLKDIVREG28, 4),
+
+ SG2042_GATE(GATE_CLK_DDR23_DIV0, "clk_gate_ddr23_div0", "dpll1_clock",
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ R_CLKDIVREG29, 4),
+ SG2042_GATE(GATE_CLK_DDR23_DIV1, "clk_gate_ddr23_div1", "fpll_clock",
+ CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
+ R_CLKDIVREG30, 4),
+
+ SG2042_GATE(GATE_CLK_RP_CPU_NORMAL_DIV0, "clk_gate_rp_cpu_normal_div0", "mpll_clock",
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
+ R_CLKDIVREG0, 4),
+ SG2042_GATE(GATE_CLK_RP_CPU_NORMAL_DIV1,
+ "clk_gate_rp_cpu_normal_div1", "fpll_clock",
+ CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
+ R_CLKDIVREG1, 4),
+
+ SG2042_GATE(GATE_CLK_AXI_DDR_DIV0, "clk_gate_axi_ddr_div0", "mpll_clock",
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
+ R_CLKDIVREG25, 4),
+ SG2042_GATE(GATE_CLK_AXI_DDR_DIV1, "clk_gate_axi_ddr_div1", "fpll_clock",
+ CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
+ R_CLKDIVREG26, 4),
+
+ /* upon are gate clocks as input source for the muxes */
+
+ SG2042_GATE(GATE_CLK_DDR01, "clk_gate_ddr01", "clk_mux_ddr01",
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
+ R_CLKENREG1, 14),
+
+ SG2042_GATE(GATE_CLK_DDR23, "clk_gate_ddr23", "clk_mux_ddr23",
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
+ R_CLKENREG1, 15),
+
+ SG2042_GATE(GATE_CLK_RP_CPU_NORMAL,
+ "clk_gate_rp_cpu_normal", "clk_mux_rp_cpu_normal",
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
+ R_CLKENREG0, 0),
+
+ SG2042_GATE(GATE_CLK_AXI_DDR, "clk_gate_axi_ddr", "clk_mux_axi_ddr",
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
+ R_CLKENREG1, 13),
+
+ /* upon are gate clocks directly downstream of muxes */
+
+ /* downstream of clk_div_top_rp_cmn_div2 */
+ SG2042_GATE(GATE_CLK_TOP_RP_CMN_DIV2,
+ "clk_gate_top_rp_cmn_div2", "clk_div_top_rp_cmn_div2",
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG0, 2),
+ SG2042_GATE(GATE_CLK_HSDMA, "clk_gate_hsdma", "clk_gate_top_rp_cmn_div2",
+ CLK_SET_RATE_PARENT, R_CLKENREG1, 10),
+
+ /*
+ * downstream of clk_gate_rp_cpu_normal
+ *
+ * FIXME: there should be one 1/2 DIV between clk_gate_rp_cpu_normal
+ * and clk_gate_axi_pcie0/clk_gate_axi_pcie1.
+ * But the 1/2 DIV is fixed and no configurable register exported, so
+ * when reading from these two clocks, the rate value are still the
+ * same as that of clk_gate_rp_cpu_normal, it's not correct.
+ * This just affects the value read.
+ */
+ SG2042_GATE(GATE_CLK_AXI_PCIE0,
+ "clk_gate_axi_pcie0", "clk_gate_rp_cpu_normal",
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG1, 8),
+ SG2042_GATE(GATE_CLK_AXI_PCIE1,
+ "clk_gate_axi_pcie1", "clk_gate_rp_cpu_normal",
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG1, 9),
+
+ /* downstream of div_50m_a53 */
+ SG2042_GATE(GATE_CLK_A53_50M, "clk_gate_a53_50m", "clk_div_50m_a53",
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG0, 1),
+ SG2042_GATE(GATE_CLK_TIMER1, "clk_gate_timer1", "clk_div_timer1",
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 12),
+ SG2042_GATE(GATE_CLK_TIMER2, "clk_gate_timer2", "clk_div_timer2",
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 13),
+ SG2042_GATE(GATE_CLK_TIMER3, "clk_gate_timer3", "clk_div_timer3",
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 14),
+ SG2042_GATE(GATE_CLK_TIMER4, "clk_gate_timer4", "clk_div_timer4",
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 15),
+ SG2042_GATE(GATE_CLK_TIMER5, "clk_gate_timer5", "clk_div_timer5",
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 16),
+ SG2042_GATE(GATE_CLK_TIMER6, "clk_gate_timer6", "clk_div_timer6",
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 17),
+ SG2042_GATE(GATE_CLK_TIMER7, "clk_gate_timer7", "clk_div_timer7",
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 18),
+ SG2042_GATE(GATE_CLK_TIMER8, "clk_gate_timer8", "clk_div_timer8",
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 19),
+
+ /* gate clocks downstream from div clocks one-to-one */
+ SG2042_GATE(GATE_CLK_UART_500M, "clk_gate_uart_500m", "clk_div_uart_500m",
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG0, 4),
+ SG2042_GATE(GATE_CLK_AHB_LPC, "clk_gate_ahb_lpc", "clk_div_ahb_lpc",
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 7),
+ SG2042_GATE(GATE_CLK_EFUSE, "clk_gate_efuse", "clk_div_efuse",
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 20),
+ SG2042_GATE(GATE_CLK_TX_ETH0, "clk_gate_tx_eth0", "clk_div_tx_eth0",
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 30),
+ SG2042_GATE(GATE_CLK_PTP_REF_I_ETH0,
+ "clk_gate_ptp_ref_i_eth0", "clk_div_ptp_ref_i_eth0",
+ CLK_SET_RATE_PARENT, R_CLKENREG1, 0),
+ SG2042_GATE(GATE_CLK_REF_ETH0, "clk_gate_ref_eth0", "clk_div_ref_eth0",
+ CLK_SET_RATE_PARENT, R_CLKENREG1, 1),
+ SG2042_GATE(GATE_CLK_EMMC_100M, "clk_gate_emmc", "clk_div_emmc",
+ CLK_SET_RATE_PARENT, R_CLKENREG1, 3),
+ SG2042_GATE(GATE_CLK_SD_100M, "clk_gate_sd", "clk_div_sd",
+ CLK_SET_RATE_PARENT, R_CLKENREG1, 6),
+
+ /* downstream of clk_div_top_axi0 */
+ SG2042_GATE(GATE_CLK_AHB_ROM, "clk_gate_ahb_rom", "clk_div_top_axi0",
+ 0, R_CLKENREG0, 8),
+ SG2042_GATE(GATE_CLK_AHB_SF, "clk_gate_ahb_sf", "clk_div_top_axi0",
+ 0, R_CLKENREG0, 9),
+ SG2042_GATE(GATE_CLK_AXI_SRAM, "clk_gate_axi_sram", "clk_div_top_axi0",
+ CLK_IGNORE_UNUSED, R_CLKENREG0, 10),
+ SG2042_GATE(GATE_CLK_APB_TIMER, "clk_gate_apb_timer", "clk_div_top_axi0",
+ CLK_IGNORE_UNUSED, R_CLKENREG0, 11),
+ SG2042_GATE(GATE_CLK_APB_EFUSE, "clk_gate_apb_efuse", "clk_div_top_axi0",
+ 0, R_CLKENREG0, 21),
+ SG2042_GATE(GATE_CLK_APB_GPIO, "clk_gate_apb_gpio", "clk_div_top_axi0",
+ 0, R_CLKENREG0, 22),
+ SG2042_GATE(GATE_CLK_APB_GPIO_INTR,
+ "clk_gate_apb_gpio_intr", "clk_div_top_axi0",
+ 0, R_CLKENREG0, 23),
+ SG2042_GATE(GATE_CLK_APB_I2C, "clk_gate_apb_i2c", "clk_div_top_axi0",
+ 0, R_CLKENREG0, 26),
+ SG2042_GATE(GATE_CLK_APB_WDT, "clk_gate_apb_wdt", "clk_div_top_axi0",
+ 0, R_CLKENREG0, 27),
+ SG2042_GATE(GATE_CLK_APB_PWM, "clk_gate_apb_pwm", "clk_div_top_axi0",
+ 0, R_CLKENREG0, 28),
+ SG2042_GATE(GATE_CLK_APB_RTC, "clk_gate_apb_rtc", "clk_div_top_axi0",
+ 0, R_CLKENREG0, 29),
+ SG2042_GATE(GATE_CLK_TOP_AXI0, "clk_gate_top_axi0", "clk_div_top_axi0",
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_CLKENREG1, 11),
+ /* downstream of DIV clocks which are sourced from clk_div_top_axi0 */
+ SG2042_GATE(GATE_CLK_GPIO_DB, "clk_gate_gpio_db", "clk_div_gpio_db",
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 24),
+ SG2042_GATE(GATE_CLK_100K_EMMC, "clk_gate_100k_emmc", "clk_div_100k_emmc",
+ CLK_SET_RATE_PARENT, R_CLKENREG1, 4),
+ SG2042_GATE(GATE_CLK_100K_SD, "clk_gate_100k_sd", "clk_div_100k_sd",
+ CLK_SET_RATE_PARENT, R_CLKENREG1, 7),
+
+ /* downstream of clk_div_top_axi_hsperi */
+ SG2042_GATE(GATE_CLK_SYSDMA_AXI,
+ "clk_gate_sysdma_axi", "clk_div_top_axi_hsperi",
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 3),
+ SG2042_GATE(GATE_CLK_APB_UART,
+ "clk_gate_apb_uart", "clk_div_top_axi_hsperi",
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 5),
+ SG2042_GATE(GATE_CLK_AXI_DBG_I2C,
+ "clk_gate_axi_dbg_i2c", "clk_div_top_axi_hsperi",
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 6),
+ SG2042_GATE(GATE_CLK_APB_SPI,
+ "clk_gate_apb_spi", "clk_div_top_axi_hsperi",
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 25),
+ SG2042_GATE(GATE_CLK_AXI_ETH0,
+ "clk_gate_axi_eth0", "clk_div_top_axi_hsperi",
+ CLK_SET_RATE_PARENT, R_CLKENREG0, 31),
+ SG2042_GATE(GATE_CLK_AXI_EMMC,
+ "clk_gate_axi_emmc", "clk_div_top_axi_hsperi",
+ CLK_SET_RATE_PARENT, R_CLKENREG1, 2),
+ SG2042_GATE(GATE_CLK_AXI_SD,
+ "clk_gate_axi_sd", "clk_div_top_axi_hsperi",
+ CLK_SET_RATE_PARENT, R_CLKENREG1, 5),
+ SG2042_GATE(GATE_CLK_TOP_AXI_HSPERI,
+ "clk_gate_top_axi_hsperi", "clk_div_top_axi_hsperi",
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_CLKENREG1, 12),
+
+ /* downstream of clk_gate_rp_cpu_normal about rxu */
+ SG2042_GATE(GATE_CLK_RXU0, "clk_gate_rxu0", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 0),
+ SG2042_GATE(GATE_CLK_RXU1, "clk_gate_rxu1", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 1),
+ SG2042_GATE(GATE_CLK_RXU2, "clk_gate_rxu2", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 2),
+ SG2042_GATE(GATE_CLK_RXU3, "clk_gate_rxu3", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 3),
+ SG2042_GATE(GATE_CLK_RXU4, "clk_gate_rxu4", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 4),
+ SG2042_GATE(GATE_CLK_RXU5, "clk_gate_rxu5", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 5),
+ SG2042_GATE(GATE_CLK_RXU6, "clk_gate_rxu6", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 6),
+ SG2042_GATE(GATE_CLK_RXU7, "clk_gate_rxu7", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 7),
+ SG2042_GATE(GATE_CLK_RXU8, "clk_gate_rxu8", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 8),
+ SG2042_GATE(GATE_CLK_RXU9, "clk_gate_rxu9", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 9),
+ SG2042_GATE(GATE_CLK_RXU10, "clk_gate_rxu10", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 10),
+ SG2042_GATE(GATE_CLK_RXU11, "clk_gate_rxu11", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 11),
+ SG2042_GATE(GATE_CLK_RXU12, "clk_gate_rxu12", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 12),
+ SG2042_GATE(GATE_CLK_RXU13, "clk_gate_rxu13", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 13),
+ SG2042_GATE(GATE_CLK_RXU14, "clk_gate_rxu14", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 14),
+ SG2042_GATE(GATE_CLK_RXU15, "clk_gate_rxu15", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 15),
+ SG2042_GATE(GATE_CLK_RXU16, "clk_gate_rxu16", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 16),
+ SG2042_GATE(GATE_CLK_RXU17, "clk_gate_rxu17", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 17),
+ SG2042_GATE(GATE_CLK_RXU18, "clk_gate_rxu18", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 18),
+ SG2042_GATE(GATE_CLK_RXU19, "clk_gate_rxu19", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 19),
+ SG2042_GATE(GATE_CLK_RXU20, "clk_gate_rxu20", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 20),
+ SG2042_GATE(GATE_CLK_RXU21, "clk_gate_rxu21", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 21),
+ SG2042_GATE(GATE_CLK_RXU22, "clk_gate_rxu22", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 22),
+ SG2042_GATE(GATE_CLK_RXU23, "clk_gate_rxu23", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 23),
+ SG2042_GATE(GATE_CLK_RXU24, "clk_gate_rxu24", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 24),
+ SG2042_GATE(GATE_CLK_RXU25, "clk_gate_rxu25", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 25),
+ SG2042_GATE(GATE_CLK_RXU26, "clk_gate_rxu26", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 26),
+ SG2042_GATE(GATE_CLK_RXU27, "clk_gate_rxu27", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 27),
+ SG2042_GATE(GATE_CLK_RXU28, "clk_gate_rxu28", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 28),
+ SG2042_GATE(GATE_CLK_RXU29, "clk_gate_rxu29", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 29),
+ SG2042_GATE(GATE_CLK_RXU30, "clk_gate_rxu30", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 30),
+ SG2042_GATE(GATE_CLK_RXU31, "clk_gate_rxu31", "clk_gate_rp_cpu_normal",
+ 0, R_RP_RXU_CLK_ENABLE, 31),
+
+ /* downstream of clk_gate_rp_cpu_normal about mp */
+ SG2042_GATE(GATE_CLK_MP0, "clk_gate_mp0", "clk_gate_rp_cpu_normal",
+ CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP0_CONTROL_REG, 0),
+ SG2042_GATE(GATE_CLK_MP1, "clk_gate_mp1", "clk_gate_rp_cpu_normal",
+ CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP1_CONTROL_REG, 0),
+ SG2042_GATE(GATE_CLK_MP2, "clk_gate_mp2", "clk_gate_rp_cpu_normal",
+ CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP2_CONTROL_REG, 0),
+ SG2042_GATE(GATE_CLK_MP3, "clk_gate_mp3", "clk_gate_rp_cpu_normal",
+ CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP3_CONTROL_REG, 0),
+ SG2042_GATE(GATE_CLK_MP4, "clk_gate_mp4", "clk_gate_rp_cpu_normal",
+ CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP4_CONTROL_REG, 0),
+ SG2042_GATE(GATE_CLK_MP5, "clk_gate_mp5", "clk_gate_rp_cpu_normal",
+ CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP5_CONTROL_REG, 0),
+ SG2042_GATE(GATE_CLK_MP6, "clk_gate_mp6", "clk_gate_rp_cpu_normal",
+ CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP6_CONTROL_REG, 0),
+ SG2042_GATE(GATE_CLK_MP7, "clk_gate_mp7", "clk_gate_rp_cpu_normal",
+ CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP7_CONTROL_REG, 0),
+ SG2042_GATE(GATE_CLK_MP8, "clk_gate_mp8", "clk_gate_rp_cpu_normal",
+ CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP8_CONTROL_REG, 0),
+ SG2042_GATE(GATE_CLK_MP9, "clk_gate_mp9", "clk_gate_rp_cpu_normal",
+ CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP9_CONTROL_REG, 0),
+ SG2042_GATE(GATE_CLK_MP10, "clk_gate_mp10", "clk_gate_rp_cpu_normal",
+ CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP10_CONTROL_REG, 0),
+ SG2042_GATE(GATE_CLK_MP11, "clk_gate_mp11", "clk_gate_rp_cpu_normal",
+ CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP11_CONTROL_REG, 0),
+ SG2042_GATE(GATE_CLK_MP12, "clk_gate_mp12", "clk_gate_rp_cpu_normal",
+ CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP12_CONTROL_REG, 0),
+ SG2042_GATE(GATE_CLK_MP13, "clk_gate_mp13", "clk_gate_rp_cpu_normal",
+ CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP13_CONTROL_REG, 0),
+ SG2042_GATE(GATE_CLK_MP14, "clk_gate_mp14", "clk_gate_rp_cpu_normal",
+ CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP14_CONTROL_REG, 0),
+ SG2042_GATE(GATE_CLK_MP15, "clk_gate_mp15", "clk_gate_rp_cpu_normal",
+ CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP15_CONTROL_REG, 0),
+};
+
+#define SG2042_MUX(_id, _name, _parent_names, _flags, _r_select, _shift, _width) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_names = _parent_names, \
+ .num_parents = ARRAY_SIZE(_parent_names), \
+ .flags = _flags, \
+ .offset_select = _r_select, \
+ .shift = _shift, \
+ .width = _width, \
+ }
+
+/*
+ * Note: regarding names for mux clock, "0/1" or "div0/div1" means the
+ * first/second parent input source, not the register value.
+ * For example:
+ * "clk_div_ddr01_0" is the name of Clock divider 0 control of DDR01, and
+ * "clk_gate_ddr01_div0" is the gate clock in front of the "clk_div_ddr01_0",
+ * they are both controlled by register CLKDIVREG27;
+ * "clk_div_ddr01_1" is the name of Clock divider 1 control of DDR01, and
+ * "clk_gate_ddr01_div1" is the gate clock in front of the "clk_div_ddr01_1",
+ * they are both controlled by register CLKDIVREG28;
+ * While for register value of mux selection, use Clock Select for DDR01’s clock
+ * as example, see CLKSELREG0, bit[2].
+ * 1: Select in_dpll0_clk as clock source, correspondng to the parent input
+ * source from "clk_div_ddr01_0".
+ * 0: Select in_fpll_clk as clock source, corresponding to the parent input
+ * source from "clk_div_ddr01_1".
+ * So we need a table to define the array of register values corresponding to
+ * the parent index and tell CCF about this when registering mux clock.
+ */
+static const u32 sg2042_mux_table[] = {1, 0};
+
+static const char *const clk_mux_ddr01_p[] = {
+ "clk_div_ddr01_0", "clk_div_ddr01_1"};
+static const char *const clk_mux_ddr23_p[] = {
+ "clk_div_ddr23_0", "clk_div_ddr23_1"};
+static const char *const clk_mux_rp_cpu_normal_p[] = {
+ "clk_div_rp_cpu_normal_0", "clk_div_rp_cpu_normal_1"};
+static const char *const clk_mux_axi_ddr_p[] = {
+ "clk_div_axi_ddr_0", "clk_div_axi_ddr_1"};
+
+static struct sg2042_mux_clock sg2042_mux_clks[] = {
+ SG2042_MUX(MUX_CLK_DDR01, "clk_mux_ddr01", clk_mux_ddr01_p,
+ CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT | CLK_MUX_READ_ONLY,
+ R_CLKSELREG0, 2, 1),
+ SG2042_MUX(MUX_CLK_DDR23, "clk_mux_ddr23", clk_mux_ddr23_p,
+ CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT | CLK_MUX_READ_ONLY,
+ R_CLKSELREG0, 3, 1),
+ SG2042_MUX(MUX_CLK_RP_CPU_NORMAL, "clk_mux_rp_cpu_normal", clk_mux_rp_cpu_normal_p,
+ CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
+ R_CLKSELREG0, 0, 1),
+ SG2042_MUX(MUX_CLK_AXI_DDR, "clk_mux_axi_ddr", clk_mux_axi_ddr_p,
+ CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
+ R_CLKSELREG0, 1, 1),
+};
+
+DEFINE_SPINLOCK(sg2042_clk_lock);
+
+static int sg2042_clk_register_plls(struct sg2042_clk_data *clk_data,
+ struct sg2042_pll_clock pll_clks[],
+ int num_pll_clks)
+{
+ struct clk_hw *hw;
+ struct sg2042_pll_clock *pll;
+ int i, ret = 0;
+
+ for (i = 0; i < num_pll_clks; i++) {
+ pll = &(pll_clks[i]);
+ /* assign these for ops usage during registration */
+ pll->map = clk_data->syscon;
+ pll->lock = &sg2042_clk_lock;
+
+ hw = &pll->hw;
+ ret = clk_hw_register(NULL, hw);
+ if (ret) {
+ pr_err("failed to register clock %s\n", pll->name);
+ break;
+ }
+
+ dbg_info("registered [%d : %s]\n", pll->id, pll->name);
+ clk_data->onecell_data.hws[pll->id] = hw;
+ }
+
+ /* leave unregister to outside if failed */
+ return ret;
+}
+
+static int sg2042_clk_register_divs(struct sg2042_clk_data *clk_data,
+ struct sg2042_divider_clock div_clks[],
+ int num_div_clks)
+{
+ struct clk_hw *hw;
+ struct sg2042_divider_clock *div;
+ int i, val, ret = 0;
+
+ for (i = 0; i < num_div_clks; i++) {
+ div = &(div_clks[i]);
+
+ if (div->div_flags & CLK_DIVIDER_HIWORD_MASK) {
+ if (div->width + div->shift > 16) {
+ pr_warn("divider value exceeds LOWORD field\n");
+ ret = -EINVAL;
+ break;
+ }
+ }
+
+ div->reg = clk_data->iobase + div->offset_ctrl;
+ div->lock = &sg2042_clk_lock;
+
+ hw = &div->hw;
+ ret = clk_hw_register(NULL, hw);
+ if (ret) {
+ pr_err("failed to register clock %s\n", div->name);
+ break;
+ }
+
+ dbg_info("registered [%d : %s]\n", div->id, div->name);
+ clk_data->onecell_data.hws[div->id] = hw;
+
+ if (div->initial_val >= 0) {
+ regmap_read(clk_data->syscon, div->offset_ctrl, &val);
+
+ /*
+ * set a default divider factor,
+ * clk driver should not select divider clock as the
+ * clock source, before set the divider by right process
+ * (assert div, set div factor, de assert div).
+ */
+ if (div->initial_val > 0)
+ val |= (div->initial_val << 16 | 1 << 3);
+ else {
+ /*
+ * the div register is config to use divider
+ * factor, don't change divider
+ */
+ if (!(val >> 3 & 0x1))
+ val |= 1 << 16;
+ }
+
+ regmap_write(clk_data->syscon, div->offset_ctrl, val);
+ }
+ }
+
+ /* leave unregister to outside if failed */
+ return ret;
+}
+
+static int sg2042_clk_register_gates(struct sg2042_clk_data *clk_data,
+ const struct sg2042_gate_clock gate_clks[],
+ int num_gate_clks)
+{
+ struct clk_hw *hw;
+ const struct sg2042_gate_clock *gate;
+ int i, ret = 0;
+
+ for (i = 0; i < num_gate_clks; i++) {
+ gate = &(gate_clks[i]);
+ hw = clk_hw_register_gate(
+ NULL,
+ gate->name,
+ gate->parent_name,
+ gate->flags,
+ clk_data->iobase + gate->offset_enable,
+ gate->bit_idx,
+ 0,
+ &sg2042_clk_lock);
+ if (IS_ERR(hw)) {
+ pr_err("failed to register clock %s\n", gate->name);
+ ret = PTR_ERR(hw);
+ break;
+ }
+
+ dbg_info("registered [%d : %s]\n", gate->id, gate->name);
+ clk_data->onecell_data.hws[gate->id] = hw;
+ }
+
+ /* leave unregister to outside if failed */
+ return ret;
+}
+
+static int sg2042_mux_notifier_cb(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ int ret = 0;
+ struct clk_notifier_data *ndata = data;
+ struct clk_hw *hw = __clk_get_hw(ndata->clk);
+ const struct clk_ops *ops = &clk_mux_ops;
+ struct sg2042_mux_clock *mux = to_sg2042_mux_nb(nb);
+
+ /* To switch to fpll before changing rate and restore after that */
+ if (event == PRE_RATE_CHANGE) {
+ mux->original_index = ops->get_parent(hw);
+ dbg_info("%s: trying to switch parent from %d to 1\n",
+ clk_hw_get_name(hw), mux->original_index);
+ /*
+ * "1" is the array index of the second parent input source of
+ * mux. For SG2042, it's fpll for all mux clocks.
+ * "0" is the array index of the frist parent input source of
+ * mux, For SG2042, it's mpll.
+ * FIXME, any good idea to avoid magic number?
+ */
+ if (mux->original_index == 0)
+ ret = ops->set_parent(hw, 1);
+ } else if (event == POST_RATE_CHANGE) {
+ dbg_info("%s: switch parent from %d to %d\n",
+ clk_hw_get_name(hw),
+ ops->get_parent(hw),
+ mux->original_index);
+ ret = ops->set_parent(hw, mux->original_index);
+ }
+
+ return notifier_from_errno(ret);
+}
+
+static int sg2042_clk_register_muxs(struct sg2042_clk_data *clk_data,
+ struct sg2042_mux_clock mux_clks[],
+ int num_mux_clks)
+{
+ struct clk_hw *hw;
+ struct sg2042_mux_clock *mux;
+ int i, ret = 0;
+
+ for (i = 0; i < num_mux_clks; i++) {
+ mux = &(mux_clks[i]);
+
+ hw = clk_hw_register_mux_table(
+ NULL,
+ mux->name,
+ mux->parent_names,
+ mux->num_parents,
+ mux->flags,
+ clk_data->iobase + mux->offset_select,
+ mux->shift,
+ BIT(mux->width) - 1,
+ 0,
+ sg2042_mux_table,
+ &sg2042_clk_lock);
+ if (IS_ERR(hw)) {
+ pr_err("failed to register clock %s\n", mux->name);
+ ret = PTR_ERR(hw);
+ break;
+ }
+
+ dbg_info("registered [%d : %s]\n", mux->id, mux->name);
+ clk_data->onecell_data.hws[mux->id] = hw;
+
+ /*
+ * FIXME: Theoretically, we should set parent for the
+ * mux, but seems hardware has done this for us with
+ * default value, so we don't set parent again here.
+ */
+
+ if (!(mux->flags & CLK_MUX_READ_ONLY)) {
+ mux->clk_nb.notifier_call = sg2042_mux_notifier_cb;
+ ret = clk_notifier_register(hw->clk, &(mux->clk_nb));
+ if (ret) {
+ pr_err("failed to register clock notifier for %s\n",
+ mux->name);
+ goto error_cleanup;
+ }
+ }
+ }
+
+ return 0;
+
+error_cleanup:
+ /* unregister notifier and release the memory allocated */
+ for (i = 0; i < num_mux_clks; i++) {
+ mux = &(mux_clks[i]);
+
+ hw = clk_data->onecell_data.hws[mux->id];
+
+ if (hw != NULL)
+ clk_notifier_unregister(hw->clk, &(mux->clk_nb));
+ }
+
+ /* leave clk unregister to outside if failed */
+ return ret;
+}
+
+static int __init sg2042_clk_init_clk_data(
+ struct device_node *node,
+ int num_clks,
+ struct sg2042_clk_data **pp_clk_data)
+{
+ int ret = 0;
+ struct sg2042_clk_data *clk_data = NULL;
+ struct device_node *np_syscon;
+
+ np_syscon = of_get_parent(node);
+ if (!np_syscon) {
+ pr_err("failed to get syscon node\n");
+ ret = -EINVAL;
+ goto error_out;
+ }
+
+ clk_data = kzalloc(struct_size(clk_data, onecell_data.hws, num_clks), GFP_KERNEL);
+ if (!clk_data) {
+ ret = -ENOMEM;
+ goto error_out;
+ }
+
+ clk_data->syscon = device_node_to_regmap(np_syscon);
+ if (IS_ERR_OR_NULL(clk_data->syscon)) {
+ pr_err("cannot get regmap(syscon) %ld\n", PTR_ERR(clk_data->syscon));
+ ret = -ENODEV;
+ goto cleanup;
+ }
+ clk_data->iobase = of_iomap(np_syscon, 0);
+ clk_data->onecell_data.num = num_clks;
+
+ *pp_clk_data = clk_data;
+ return ret;
+
+cleanup:
+ kfree(clk_data);
+
+error_out:
+ return ret;
+}
+
+static void __init sg2042_clk_init(struct device_node *node)
+{
+ struct sg2042_clk_data *clk_data = NULL;
+ int i, ret = 0;
+ int num_clks = 0;
+
+ num_clks = ARRAY_SIZE(sg2042_pll_clks) +
+ ARRAY_SIZE(sg2042_div_clks) +
+ ARRAY_SIZE(sg2042_gate_clks) +
+ ARRAY_SIZE(sg2042_mux_clks);
+ if (num_clks == 0) {
+ ret = -EINVAL;
+ goto error_out;
+ }
+
+ ret = sg2042_clk_init_clk_data(node, num_clks, &clk_data);
+ if (ret < 0)
+ goto error_out;
+
+ ret = sg2042_clk_register_plls(clk_data, sg2042_pll_clks,
+ ARRAY_SIZE(sg2042_pll_clks));
+ if (ret)
+ goto cleanup;
+
+ ret = sg2042_clk_register_divs(clk_data, sg2042_div_clks,
+ ARRAY_SIZE(sg2042_div_clks));
+ if (ret)
+ goto cleanup;
+
+ ret = sg2042_clk_register_gates(clk_data, sg2042_gate_clks,
+ ARRAY_SIZE(sg2042_gate_clks));
+ if (ret)
+ goto cleanup;
+
+ ret = sg2042_clk_register_muxs(clk_data, sg2042_mux_clks,
+ ARRAY_SIZE(sg2042_mux_clks));
+ if (ret)
+ goto cleanup;
+
+ for (i = 0; i < num_clks; i++)
+ dbg_info("provider [%d]: %s\n", i, clk_hw_get_name(clk_data->onecell_data.hws[i]));
+ ret = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, &clk_data->onecell_data);
+ if (ret)
+ goto cleanup;
+
+ return;
+
+cleanup:
+ for (i = 0; i < num_clks; i++) {
+ if (clk_data->onecell_data.hws[i] != NULL)
+ clk_hw_unregister(clk_data->onecell_data.hws[i]);
+ }
+ kfree(clk_data);
+
+error_out:
+ pr_err("%s failed error number %d\n", __func__, ret);
+}
+
+CLK_OF_DECLARE(sg2042_clk, "sophgo,sg2042-clkgen", sg2042_clk_init);
diff --git a/drivers/clk/sophgo/clk-sophgo-sg2042.h b/drivers/clk/sophgo/clk-sophgo-sg2042.h
new file mode 100644
index 000000000000..ca1c8b9a937a
--- /dev/null
+++ b/drivers/clk/sophgo/clk-sophgo-sg2042.h
@@ -0,0 +1,222 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __CLK_SOPHGO_SG2042_H
+#define __CLK_SOPHGO_SG2042_H
+
+#include <linux/regmap.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+
+#define R_PLL_STAT 0xC0
+#define R_PLL_CLKEN_CONTROL 0xC4
+#define R_MPLL_CONTROL 0xE8
+#define R_FPLL_CONTROL 0xF4
+#define R_DPLL0_CONTROL 0xF8
+#define R_DPLL1_CONTROL 0xFC
+
+#define R_CLKENREG0 0x2000
+#define R_CLKENREG1 0x2004
+#define R_CLKSELREG0 0x2020
+#define R_CLKDIVREG0 0x2040
+#define R_CLKDIVREG1 0x2044
+#define R_CLKDIVREG2 0x2048
+#define R_CLKDIVREG3 0x204C
+#define R_CLKDIVREG4 0x2050
+#define R_CLKDIVREG5 0x2054
+#define R_CLKDIVREG6 0x2058
+#define R_CLKDIVREG7 0x205C
+#define R_CLKDIVREG8 0x2060
+#define R_CLKDIVREG9 0x2064
+#define R_CLKDIVREG10 0x2068
+#define R_CLKDIVREG11 0x206C
+#define R_CLKDIVREG12 0x2070
+#define R_CLKDIVREG13 0x2074
+#define R_CLKDIVREG14 0x2078
+#define R_CLKDIVREG15 0x207C
+#define R_CLKDIVREG16 0x2080
+#define R_CLKDIVREG17 0x2084
+#define R_CLKDIVREG18 0x2088
+#define R_CLKDIVREG19 0x208C
+#define R_CLKDIVREG20 0x2090
+#define R_CLKDIVREG21 0x2094
+#define R_CLKDIVREG22 0x2098
+#define R_CLKDIVREG23 0x209C
+#define R_CLKDIVREG24 0x20A0
+#define R_CLKDIVREG25 0x20A4
+#define R_CLKDIVREG26 0x20A8
+#define R_CLKDIVREG27 0x20AC
+#define R_CLKDIVREG28 0x20B0
+#define R_CLKDIVREG29 0x20B4
+#define R_CLKDIVREG30 0x20B8
+
+#define R_RP_RXU_CLK_ENABLE 0x0368
+#define R_MP0_STATUS_REG 0x0380
+#define R_MP0_CONTROL_REG 0x0384
+#define R_MP1_STATUS_REG 0x0388
+#define R_MP1_CONTROL_REG 0x038C
+#define R_MP2_STATUS_REG 0x0390
+#define R_MP2_CONTROL_REG 0x0394
+#define R_MP3_STATUS_REG 0x0398
+#define R_MP3_CONTROL_REG 0x039C
+#define R_MP4_STATUS_REG 0x03A0
+#define R_MP4_CONTROL_REG 0x03A4
+#define R_MP5_STATUS_REG 0x03A8
+#define R_MP5_CONTROL_REG 0x03AC
+#define R_MP6_STATUS_REG 0x03B0
+#define R_MP6_CONTROL_REG 0x03B4
+#define R_MP7_STATUS_REG 0x03B8
+#define R_MP7_CONTROL_REG 0x03BC
+#define R_MP8_STATUS_REG 0x03C0
+#define R_MP8_CONTROL_REG 0x03C4
+#define R_MP9_STATUS_REG 0x03C8
+#define R_MP9_CONTROL_REG 0x03CC
+#define R_MP10_STATUS_REG 0x03D0
+#define R_MP10_CONTROL_REG 0x03D4
+#define R_MP11_STATUS_REG 0x03D8
+#define R_MP11_CONTROL_REG 0x03DC
+#define R_MP12_STATUS_REG 0x03E0
+#define R_MP12_CONTROL_REG 0x03E4
+#define R_MP13_STATUS_REG 0x03E8
+#define R_MP13_CONTROL_REG 0x03EC
+#define R_MP14_STATUS_REG 0x03F0
+#define R_MP14_CONTROL_REG 0x03F4
+#define R_MP15_STATUS_REG 0x03F8
+#define R_MP15_CONTROL_REG 0x03FC
+
+/*
+ * clock common data
+ * @iobase & @syscon: point to the same address (top of syscon), the reason
+ * we use two different type of pointer just due to pll uses regmap while
+ * others use iomem.
+ * @lock: clock register access lock
+ * @onecell_data: used for adding provider
+ */
+struct sg2042_clk_data {
+ void __iomem *iobase;
+ struct regmap *syscon;
+ struct clk_hw_onecell_data onecell_data;
+};
+
+/*
+ * PLL clock
+ * @id: used to map clk_onecell_data
+ * @name: used for print even when clk registration failed
+ * @map: used for regmap read/write, regmap is more useful
+ * then iomem address when we have multiple offsets
+ * for different registers
+ * @lock: spinlock to protect register access
+ * @offset_status: offset of pll status registers
+ * @offset_enable: offset of pll enable registers
+ * @offset_ctrl: offset of pll control registers
+ * @shift_status_lock: shift of XXX_LOCK in pll status register
+ * @shift_status_updating: shift of UPDATING_XXX in pll status register
+ * @shift_enable: shift of XXX_CLK_EN in pll enable register
+ */
+struct sg2042_pll_clock {
+ struct clk_hw hw;
+
+ /* private data */
+ unsigned int id;
+ const char *name;
+
+ struct regmap *map;
+ spinlock_t *lock;
+
+ u32 offset_status;
+ u32 offset_enable;
+ u32 offset_ctrl;
+ u8 shift_status_lock;
+ u8 shift_status_updating;
+ u8 shift_enable;
+};
+
+#define to_sg2042_pll_clk(_hw) container_of(_hw, struct sg2042_pll_clock, hw)
+
+/*
+ * Divider clock
+ * @id: used to map clk_onecell_data
+ * @name: used for print even when clk registration failed
+ * @reg: used for readl/writel.
+ * @lock: spinlock to protect register access
+ * @offset_ctrl: offset of divider control registers
+ * @shift: shift of "Clock Divider Factor" in divider control register
+ * @width: width of "Clock Divider Factor" in divider control register
+ * @div_flags: private flags for this clock, not for framework-specific
+ * @initial_val: initial value of the divider, a value < 0 means ignoring
+ * setting of initial value.
+ * @table: the div table that the divider supports
+ */
+struct sg2042_divider_clock {
+ struct clk_hw hw;
+
+ /* private data */
+ unsigned int id;
+ const char *name;
+
+ void __iomem *reg;
+ spinlock_t *lock;
+
+ unsigned long offset_ctrl;
+ u8 shift;
+ u8 width;
+ u8 div_flags;
+ s32 initial_val;
+ struct clk_div_table *table;
+};
+
+#define to_sg2042_clk_divider(_hw) \
+ container_of(_hw, struct sg2042_divider_clock, hw)
+
+/*
+ * Gate clock
+ * @id: used to map clk_onecell_data
+ * @name: string of this clock name
+ * @parent_name: string of parent clock name
+ * @flags: framework-specific flags for this clock
+ * @offset_enable: offset of gate enable registers
+ * @bit_idx: which bit in the register controls gating of this clock
+ */
+struct sg2042_gate_clock {
+ unsigned int id;
+ const char *name;
+ const char *parent_name;
+ unsigned long flags;
+ unsigned long offset_enable;
+ u8 bit_idx;
+};
+
+/*
+ * Gate clock
+ * @id: used to map clk_onecell_data
+ * @name: string of this clock name
+ * @parent_name: string array of parents' clock name
+ * @flags: framework-specific flags for this clock
+ * @offset_select: offset of mux selection registers
+ * @shift: shift of "Clock Select" in mux selection register
+ * @width: width of "Clock Select" in mux selection register
+ * @clk_nb: used for notification
+ * @original_index: set by notifier callback
+ */
+struct sg2042_mux_clock {
+ unsigned int id;
+ const char *name;
+ const char * const *parent_names;
+ u8 num_parents;
+ unsigned long flags;
+ unsigned long offset_select;
+ u8 shift;
+ u8 width;
+ struct notifier_block clk_nb;
+ u8 original_index;
+};
+
+#define to_sg2042_mux_nb(_nb) container_of(_nb, struct sg2042_mux_clock, clk_nb)
+
+#ifdef DEBUG
+ #define dbg_info(format, arg...) \
+ pr_info("--> %s: "format"", __func__, ## arg)
+#else
+ #define dbg_info(format, arg...)
+#endif
+
+#endif /* __CLK_SOPHGO_SG2042_H */
--
2.25.1
