Edgeble NCM6A-IO board has M.2 M-Key via PCI3x4.
Add support for it.
Signed-off-by: Jagan Teki <jagan@xxxxxxxxxx>
---
.../dts/rockchip/rk3588-edgeble-neu6a-io.dtsi | 36 +++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi
index 7e838d76fa73..03a81f1dedf9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi
@@ -22,6 +22,19 @@ vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator {
startup-delay-us = <5000>;
vin-supply = <&vcc_3v3_s3>;
};
+
+ vcc3v3_pcie3x4: vcc3v3-pcie30 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>; /* PCIE30x4_PWREN_H */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie3x4_vcc3v3_en>;
+ regulator-name = "vcc3v3_pcie3x4";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <5000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
};
&combphy0_ps {
@@ -57,6 +70,19 @@ &pcie2x1l0 {
status = "okay";
};
+&pcie30phy {
+ status = "okay";
+};
+
+/* M-Key */
+&pcie3x4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie3x4_rst>;
+ reset-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; /* PCIE30X2_PERSTn_M1_L */
+ vpcie3v3-supply = <&vcc3v3_pcie3x4>;
+ status = "okay";
+};
+
&pinctrl {
pcie2 {
pcie2_0_rst: pcie2-0-rst {
@@ -64,6 +90,16 @@ pcie2_0_rst: pcie2-0-rst {
};
};
+ pcie3 {
+ pcie3x4_rst: pcie3x4-rst {
+ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie3x4_vcc3v3_en: pcie3x4-vcc3v3-en {
+ rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
hym8563 {
hym8563_int: hym8563-int {
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
--
2.25.1
