Edgeble Neu6a and Neu6b are compatible with common IO board.
So, maintain the IO board in rk3588-edgeble-neu6a-io.dtsi.
Signed-off-by: Jagan Teki <jagan@xxxxxxxxxx>
---
.../dts/rockchip/rk3588-edgeble-neu6a-io.dts | 14 +--
.../dts/rockchip/rk3588-edgeble-neu6a-io.dtsi | 85 +++++++++++++++++++
.../dts/rockchip/rk3588-edgeble-neu6b-io.dts | 80 +----------------
3 files changed, 87 insertions(+), 92 deletions(-)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts
index b51543892078..46d5e21d4d27 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts
@@ -6,22 +6,10 @@
/dts-v1/;
#include "rk3588.dtsi"
#include "rk3588-edgeble-neu6a.dtsi"
+#include "rk3588-edgeble-neu6a-io.dtsi"
/ {
model = "Edgeble Neu6A IO Board";
compatible = "edgeble,neural-compute-module-6a-io",
"edgeble,neural-compute-module-6a", "rockchip,rk3588";
-
- aliases {
- serial2 = &uart2;
- };
-
- chosen {
- stdout-path = "serial2:1500000n8";
- };
-};
-
-&uart2 {
- pinctrl-0 = <&uart2m0_xfer>;
- status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi
new file mode 100644
index 000000000000..845f90c302ca
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/ {
+ aliases {
+ serial2 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+};
+
+&combphy0_ps {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+
+ hym8563: rtc@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <0>;
+ clock-output-names = "hym8563";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hym8563_int>;
+ wakeup-source;
+ };
+};
+
+&pinctrl {
+ hym8563 {
+ hym8563_int: hym8563-int {
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+/* FAN */
+&pwm2 {
+ pinctrl-0 = <&pwm2m1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&sata0 {
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ no-sdio;
+ no-mmc;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_3v3_s3>;
+ vqmmc-supply = <&vccio_sd_s0>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "okay";
+};
+
+/* RS232 */
+&uart6 {
+ pinctrl-0 = <&uart6m0_xfer>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+/* RS485 */
+&uart7 {
+ pinctrl-0 = <&uart7m2_xfer>;
+ pinctrl-names = "default";
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts
index 861067b5d707..0d6f1be69ac8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts
@@ -6,88 +6,10 @@
/dts-v1/;
#include "rk3588j.dtsi"
#include "rk3588-edgeble-neu6b.dtsi"
+#include "rk3588-edgeble-neu6a-io.dtsi"
/ {
model = "Edgeble Neu6B IO Board";
compatible = "edgeble,neural-compute-module-6a-io",
"edgeble,neural-compute-module-6b", "rockchip,rk3588";
-
- aliases {
- serial2 = &uart2;
- };
-
- chosen {
- stdout-path = "serial2:1500000n8";
- };
-};
-
-&combphy0_ps {
- status = "okay";
-};
-
-&i2c6 {
- status = "okay";
-
- hym8563: rtc@51 {
- compatible = "haoyu,hym8563";
- reg = <0x51>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <0>;
- clock-output-names = "hym8563";
- pinctrl-names = "default";
- pinctrl-0 = <&hym8563_int>;
- wakeup-source;
- };
-};
-
-&pinctrl {
- hym8563 {
- hym8563_int: hym8563-int {
- rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-/* FAN */
-&pwm2 {
- pinctrl-0 = <&pwm2m1_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&sata0 {
- status = "okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- disable-wp;
- no-sdio;
- no-mmc;
- sd-uhs-sdr104;
- vmmc-supply = <&vcc_3v3_s3>;
- vqmmc-supply = <&vccio_sd_s0>;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-0 = <&uart2m0_xfer>;
- status = "okay";
-};
-
-/* RS232 */
-&uart6 {
- pinctrl-0 = <&uart6m0_xfer>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-/* RS485 */
-&uart7 {
- pinctrl-0 = <&uart7m2_xfer>;
- pinctrl-names = "default";
- status = "okay";
};
--
2.25.1
