This series brings:
- interconnect plumbing
- display setup
for QCM2290/QRB2210 and
- CAN bus controller
- HDMI display
- wifi fw variant name
for QTI RB1
and the necessary bindings changes
Patch 1-4 is for Dmitry/freedreno
Patch 5 for Georgi/icc
Patch 7 for Will/iommu
the rest are for Bjorn/qcom
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
Dmitry Baryshkov (1):
arm64: dts: qcom: qrb2210-rb1: add wifi variant property
Konrad Dybcio (11):
dt-bindings: display: msm: qcm2290-mdss: Use the non-deprecated DSI compat
dt-bindings: display: msm: Add reg bus and rotator interconnects
dt-bindings: display: msm: qcm2290-mdss: Allow 2 interconnects
dt-bindings: display: msm: sm8450-mdss: Allow 3 interconnects
dt-bindings: interconnect: qcom,msm8998-bwmon: Add QCM2290 bwmon instance
dt-bindings: firmware: qcom,scm: Allow interconnect for everyone
iommu/arm-smmu-qcom: Add QCM2290 DPU compatible
arm64: dts: qcom: qcm2290: Add display nodes
arm64: dts: qcom: qcm2290: Hook up interconnects
arm64: dts: qcom: qrb2210-rb1: Set up HDMI
arm64: dts: qcom: qrb2210-rb1: Enable CAN bus controller
.../bindings/display/msm/mdss-common.yaml | 18 +-
.../bindings/display/msm/qcom,qcm2290-mdss.yaml | 8 +-
.../bindings/display/msm/qcom,sm8450-mdss.yaml | 4 +-
.../devicetree/bindings/firmware/qcom,scm.yaml | 15 -
.../bindings/interconnect/qcom,msm8998-bwmon.yaml | 1 +
arch/arm64/boot/dts/qcom/qcm2290.dtsi | 462 +++++++++++++++++++++
arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 109 +++++
drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 1 +
8 files changed, 594 insertions(+), 24 deletions(-)
---
base-commit: 8c9660f6515396aba78d1168d2e17951d653ebf2
change-id: 20231125-topic-rb1_feat-dd510532621b
Best regards,
--
Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
