Hook up UART3, usually used for communicating with a Bluetooth module.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm6115.dtsi | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 839c60351240..0d13d7bf6bd1 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -273,6 +273,25 @@ memory@80000000 {
reg = <0 0x80000000 0 0>;
};
+ qup_opp_table: opp-table-qup {
+ compatible = "operating-points-v2";
+
+ opp-75000000 {
+ opp-hz = /bits/ 64 <75000000>;
+ required-opps = <&rpmpd_opp_low_svs>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmpd_opp_svs>;
+ };
+
+ opp-128000000 {
+ opp-hz = /bits/ 64 <128000000>;
+ required-opps = <&rpmpd_opp_nom>;
+ };
+ };
+
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
@@ -1208,6 +1227,17 @@ spi3: spi@4a8c000 {
status = "disabled";
};
+ uart3: serial@4a8c000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x0 0x04a8c000 0x0 0x4000>;
+ interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ clock-names = "se";
+ power-domains = <&rpmpd SM6115_VDDCX>;
+ operating-points-v2 = <&qup_opp_table>;
+ status = "disabled";
+ };
+
i2c4: i2c@4a90000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0x04a90000 0x0 0x4000>;
--
2.43.0
