On Mon, Nov 20, 2023 at 02:50:38PM +0100, Christian Marangi wrote:
> From: Robert Marko <robert.marko@xxxxxxxxxx>
>
> Add DT bindings defined for Qualcomm QCA807x PHY series related to
> calibration and DAC settings.
>
> Signed-off-by: Robert Marko <robert.marko@xxxxxxxxxx>
> Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> ---
> include/dt-bindings/net/qcom-qca807x.h | 45 ++++++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
> create mode 100644 include/dt-bindings/net/qcom-qca807x.h
>
> diff --git a/include/dt-bindings/net/qcom-qca807x.h b/include/dt-bindings/net/qcom-qca807x.h
> new file mode 100644
> index 000000000000..42c45c7d5210
> --- /dev/null
> +++ b/include/dt-bindings/net/qcom-qca807x.h
> @@ -0,0 +1,45 @@
> +/* SPDX-License-Identifier: GPL-2.0-only OR MIT */
> +/*
> + * Device Tree constants for the Qualcomm QCA807X PHYs
> + */
> +
> +#ifndef _DT_BINDINGS_QCOM_QCA807X_H
> +#define _DT_BINDINGS_QCOM_QCA807X_H
> +
> +#define PSGMII_QSGMII_TX_DRIVER_140MV 0
> +#define PSGMII_QSGMII_TX_DRIVER_160MV 1
> +#define PSGMII_QSGMII_TX_DRIVER_180MV 2
> +#define PSGMII_QSGMII_TX_DRIVER_200MV 3
> +#define PSGMII_QSGMII_TX_DRIVER_220MV 4
> +#define PSGMII_QSGMII_TX_DRIVER_240MV 5
> +#define PSGMII_QSGMII_TX_DRIVER_260MV 6
> +#define PSGMII_QSGMII_TX_DRIVER_280MV 7
> +#define PSGMII_QSGMII_TX_DRIVER_300MV 8
> +#define PSGMII_QSGMII_TX_DRIVER_320MV 9
> +#define PSGMII_QSGMII_TX_DRIVER_400MV 10
> +#define PSGMII_QSGMII_TX_DRIVER_500MV 11
> +/* Default value */
> +#define PSGMII_QSGMII_TX_DRIVER_600MV 12
Its not clear what these are used for. I think these are actually
package properties, so having the correctly documented in the binding
would help a lot understand why we need package properties.
Actually using #define like this is probably wrong. You should just
have a u32 tx_driver_mv property, and list [140, 160, 180, 200,
... 600] as valid values. The driver should then convert to whatever
value it should write into the register.
Andrew
