Re: [PATCH v2 1/7] dt-bindings: usb: ti,j721e-usb: add ti,j7200-usb compatible

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

On Wed Nov 22, 2023 at 1:00 PM CET, Krzysztof Kozlowski wrote:
> On 22/11/2023 11:46, Théo Lebrun wrote:
> >  - properties:
> >    compatible:
> >      oneOf:
> >        - const: ti,j7200-usb
> >        - items:
> >            - const: ti,j721e-usb
> >            - const: ti,am64-usb
> > 
> >    J721E & AM64 are compatible, express that & update devicetrees.
> > 
> > Option one is simpler & doesn't change devicetrees so I'd lean in that
> > direction. What's your opinion?
>
> This one should be for am64.
>
> For your j7200, it depends whether the fallback to j721e makes sense,
> IOW, if the Linux can use j721e compatible solely to use j7200 device.

All compatibles might be equivalent if the reset-on-resume behavior is
observed on all three platforms. I don't have access to J721E or AM64
to test that.

@Roger Quadros: do you have any news if USB suspend/resume works on
J721E and/or AM64? My testing on the J7200 EVM is (1) boot, (2) put
the "USB2.0_MUX_SEL" GPIO high to have USB devices connected without
plugging anything, then (3) trigger a s2idle. I get a memory bus
exception on resume without my patches.

Regards,

--
Théo Lebrun, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux