Il 22/11/23 12:23, Eugen Hristev ha scritto:
On 11/21/23 14:50, AngeloGioacchino Del Regno wrote:
The t-calibration-data (SVS-Thermal calibration data) shall exist for
all SoCs or SVS won't work anyway: move it to the common svs_probe()
function and remove it from all of the per-SoC efuse_parsing() probe
callbacks.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
---
drivers/soc/mediatek/mtk-svs.c | 32 ++++++--------------------------
1 file changed, 6 insertions(+), 26 deletions(-)
diff --git a/drivers/soc/mediatek/mtk-svs.c b/drivers/soc/mediatek/mtk-svs.c
index ab564d48092b..1042af2aee3f 100644
--- a/drivers/soc/mediatek/mtk-svs.c
+++ b/drivers/soc/mediatek/mtk-svs.c
@@ -1884,11 +1884,6 @@ static bool svs_mt8195_efuse_parsing(struct svs_platform
*svsp)
svsb->vmax += svsb->dvt_fixed;
}
- ret = svs_get_efuse_data(svsp, "t-calibration-data",
- &svsp->tefuse, &svsp->tefuse_max);
- if (ret)
- return false;
-
Hello Angelo,
if you removed the code using `ret` in this patch, it makes sense to also remove
the variable here instead of doing it in patch 18.
It will avoid unused variable warnings for this patch.
Yes, though the comment is not for this function, but rather for 8183. Anyway, that
makes sense, but if it's the only change of this v3, it's something that I can fix
while applying instead of sending another 20 patches round. Thanks.
for (i = 0; i < svsp->tefuse_max; i++)
if (svsp->tefuse[i] != 0)
break;
@@ -1949,11 +1944,6 @@ static bool svs_mt8192_efuse_parsing(struct svs_platform
*svsp)
svsb->vmax += svsb->dvt_fixed;
}
- ret = svs_get_efuse_data(svsp, "t-calibration-data",
- &svsp->tefuse, &svsp->tefuse_max);
- if (ret)
- return false;
-
for (i = 0; i < svsp->tefuse_max; i++)
if (svsp->tefuse[i] != 0)
break;
@@ -2009,11 +1999,6 @@ static bool svs_mt8188_efuse_parsing(struct svs_platform
*svsp)
svsb->vmax += svsb->dvt_fixed;
}
- ret = svs_get_efuse_data(svsp, "t-calibration-data",
- &svsp->tefuse, &svsp->tefuse_max);
- if (ret)
- return false;
-
for (i = 0; i < svsp->tefuse_max; i++)
if (svsp->tefuse[i] != 0)
break;
@@ -2097,11 +2082,6 @@ static bool svs_mt8186_efuse_parsing(struct svs_platform
*svsp)
svsb->vmax += svsb->dvt_fixed;
}
- ret = svs_get_efuse_data(svsp, "t-calibration-data",
- &svsp->tefuse, &svsp->tefuse_max);
- if (ret)
- return false;
-
golden_temp = (svsp->tefuse[0] >> 24) & GENMASK(7, 0);
if (!golden_temp)
golden_temp = 50;
@@ -2198,11 +2178,6 @@ static bool svs_mt8183_efuse_parsing(struct svs_platform
*svsp)
}
}
- ret = svs_get_efuse_data(svsp, "t-calibration-data",
- &svsp->tefuse, &svsp->tefuse_max);
- if (ret)
- return false;
-
/* Thermal efuse parsing */
adc_ge_t = (svsp->tefuse[1] >> 22) & GENMASK(9, 0);
adc_oe_t = (svsp->tefuse[1] >> 12) & GENMASK(9, 0);
@@ -3040,8 +3015,13 @@ static int svs_probe(struct platform_device *pdev)
ret = svs_get_efuse_data(svsp, "svs-calibration-data",
&svsp->efuse, &svsp->efuse_max);
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret, "Cannot read SVS calibration\n");
With the previous code, if svs-calibration-data could not be read, the code would
go to svs_probe_free_efuse. In your case, it returns directly.
I believe that svs_get_efuse_data using nvmem_cell_read does not allocate the
buffer for the efuse , hence no more need to free it ? The exit code is checking if
it's ERR or NULL, but still, if the buffer was not allocated, it doesn't make sense
to jump there indeed.
In that case, you are also changing the behavior here , and your commit appears to
do more than a simple move.
I'm not changing the behavior: the previous behavior was to fail and free the efuse
variable if previously allocated, the current behavior is to fail and free the
efuse variable if previously allocated, and the tefuse variable if previously
allocated, which is a result of the actual move of the retrieval of the thermal
fuse calibration data.
I really don't see anything implicit here.
+
+ ret = svs_get_efuse_data(svsp, "t-calibration-data",
+ &svsp->tefuse, &svsp->tefuse_max);
if (ret) {
- ret = -EPERM;
+ dev_err_probe(&pdev->dev, ret, "Cannot read SVS-Thermal calibration\n");
goto svs_probe_free_efuse;
again in this case the tefuse has not been allocated I assume.
So previous code was a bit excessive in trying to free the efuse/tefuse ?
The previous code was performing an useless error check on something that was not
supposed to be allocated *yet*. Yes, it was wrong before.
Cheers,
Angelo
