On Tue, 21 Nov 2023 15:47:48 +0530, Anshul Dalal wrote: > Adds bindings for the Adafruit Seesaw Gamepad. > > The gamepad functions as an i2c device with the default address of 0x50 > and has an IRQ pin that can be enabled in the driver to allow for a rising > edge trigger on each button press or joystick movement. > > Product page: > https://www.adafruit.com/product/5743 > Arduino driver: > https://github.com/adafruit/Adafruit_Seesaw > > Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> > Signed-off-by: Anshul Dalal <anshulusr@xxxxxxxxx> > > --- > > Changes for v9: > - Added interrupt in example > > v8: https://lore.kernel.org/lkml/20231108005337.45069-1-anshulusr@xxxxxxxxx/ > > Changes for v8: > - no updates > > v7: https://lore.kernel.org/lkml/20231106164134.114668-1-anshulusr@xxxxxxxxx/ > > Changes for v7: > - no updates > > v6: https://lore.kernel.org/lkml/20231027051819.81333-1-anshulusr@xxxxxxxxx/ > > Changes for v6: > - no updates > > v5: https://lore.kernel.org/lkml/20231017034356.1436677-1-anshulusr@xxxxxxxxx/ > > Changes for v5: > - Added link to the datasheet > > v4: https://lore.kernel.org/lkml/20231010184827.1213507-1-anshulusr@xxxxxxxxx/ > > Changes for v4: > - Fixed the URI for the id field > - Added `interrupts` property > > v3: https://lore.kernel.org/linux-input/20231008185709.2448423-1-anshulusr@xxxxxxxxx/ > > Changes for v3: > - Updated id field to reflect updated file name from previous version > - Added `reg` property > > v2: https://lore.kernel.org/linux-input/20231008172435.2391009-1-anshulusr@xxxxxxxxx/ > > Changes for v2: > - Renamed file to `adafruit,seesaw-gamepad.yaml` > - Removed quotes for `$id` and `$schema` > - Removed "Bindings for" from the description > - Changed node name to the generic name "joystick" > - Changed compatible to 'adafruit,seesaw-gamepad' instead of > 'adafruit,seesaw_gamepad' > > v1: https://lore.kernel.org/linux-input/20231007144052.1535417-1-anshulusr@xxxxxxxxx/ > --- > .../input/adafruit,seesaw-gamepad.yaml | 61 +++++++++++++++++++ > 1 file changed, 61 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/adafruit,seesaw-gamepad.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Error: Documentation/devicetree/bindings/input/adafruit,seesaw-gamepad.example.dts:30.34-35 syntax error FATAL ERROR: Unable to parse input tree make[2]: *** [scripts/Makefile.lib:419: Documentation/devicetree/bindings/input/adafruit,seesaw-gamepad.example.dtb] Error 1 make[2]: *** Waiting for unfinished jobs.... make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1424: dt_binding_check] Error 2 make: *** [Makefile:234: __sub-make] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231121101751.2189965-1-anshulusr@xxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
