On Tue, 21 Nov 2023 18:00:11 +0800, Kim Seer Paller wrote: > Dual microwave down converter module with input RF and LO frequency > ranges from 0.5 to 32 GHz and an output IF frequency range from 0.1 to > 8 GHz. It consists of a LNA, mixer, IF filter, DSA, and IF amplifier > for each down conversion path. > > Signed-off-by: Kim Seer Paller <kimseer.paller@xxxxxxxxxx> > --- > V1 -> V2: Removed '|' after description. Specified the pins connected to > the GPIOs. Added additionalProperties: false. Changed node name to gpio. > Aligned < syntax with the previous syntax in the examples. > > .../bindings/iio/frequency/adi,admfm2000.yaml | 130 ++++++++++++++++++ > MAINTAINERS | 7 + > 2 files changed, 137 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml:14:5: [warning] wrong indentation: expected 2 but found 4 (indentation) dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231121100012.112861-1-kimseer.paller@xxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
