Add node for NXP TDA19988 encoder and refer to it in the hdmi node
instead of referring to the i2c bus where the encoder is connected to.
Signed-off-by: Jyri Sarha <jsarha@xxxxxx>
---
arch/arm/boot/dts/am335x-boneblack.dts | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
index 5c42d25..c0c8e4b 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -70,10 +70,17 @@
status = "okay";
};
+&i2c0 {
+ tda19988: tda19988@70 {
+ compatible = "nxp,tda998x";
+ reg = <0x70>;
+ };
+};
+
/ {
hdmi {
compatible = "ti,tilcdc,slave";
- i2c = <&i2c0>;
+ i2c-slave = <&tda19988>;
pinctrl-names = "default", "off";
pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
