Re: [PATCH v4 15/19] watchdog: s3c2410_wdt: Add support for WTCON register DBGACK_MASK bit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/20/23 13:20, Peter Griffin wrote:
The WDT uses the CPU core signal DBGACK to determine whether the SoC
is running in debug mode or not. If the DBGACK signal is asserted and
DBGACK_MASK is enabled, then WDT output and interrupt is masked.

Presence of the DBGACK_MASK bit is determined by adding a new
QUIRK_HAS_DBGACK_BIT quirk. Currently only gs101 SoC is known to have
the DBGACK_MASK bit so add the quirk to drv_data_gs101_cl1 and
drv_data_gs101_cl1 quirks.

Signed-off-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
---
  drivers/watchdog/s3c2410_wdt.c | 32 +++++++++++++++++++++++++++-----
  1 file changed, 27 insertions(+), 5 deletions(-)

diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 08b8c57dd812..ed561deeeed9 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -34,9 +34,10 @@
#define S3C2410_WTCNT_MAXCNT 0xffff -#define S3C2410_WTCON_RSTEN (1 << 0)
-#define S3C2410_WTCON_INTEN	(1 << 2)
-#define S3C2410_WTCON_ENABLE	(1 << 5)
+#define S3C2410_WTCON_RSTEN		(1 << 0)
+#define S3C2410_WTCON_INTEN		(1 << 2)
+#define S3C2410_WTCON_ENABLE		(1 << 5)
+#define S3C2410_WTCON_DBGACK_MASK	(1 << 16)
#define S3C2410_WTCON_DIV16 (0 << 3)
  #define S3C2410_WTCON_DIV32	(1 << 3)
@@ -107,12 +108,16 @@
   * %QUIRK_HAS_PMU_CNT_EN: PMU block has some register (e.g. CLUSTERx_NONCPU_OUT)
   * with "watchdog counter enable" bit. That bit should be set to make watchdog
   * counter running.
+ *
+ * %QUIRK_HAS_DBGACK_BIT: WTCON register has DBGACK_MASK bit. Enables masking
+ * WDT interrupt and reset request according to CPU core DBGACK signal.

This is a bit difficult to understand. I _think_ it means that the DBGACK_MASK bit
has to be set to be able to trigger interrupt and reset requests.
"masking" normally refers to disabling something (at least in interrupt context).
"Enables masking WDT interrupt" sounds like the bit has to be set in order to
be able to disable interupts, and the code below suggests that the bit has to be
set for the driver to work. Is that the case ? It might make sense to explain this
a bit further.

   */
  #define QUIRK_HAS_WTCLRINT_REG			(1 << 0)
  #define QUIRK_HAS_PMU_MASK_RESET		(1 << 1)
  #define QUIRK_HAS_PMU_RST_STAT			(1 << 2)
  #define QUIRK_HAS_PMU_AUTO_DISABLE		(1 << 3)
  #define QUIRK_HAS_PMU_CNT_EN			(1 << 4)
+#define QUIRK_HAS_DBGACK_BIT			(1 << 5)
/* These quirks require that we have a PMU register map */
  #define QUIRKS_HAVE_PMUREG \
@@ -279,7 +284,7 @@ static const struct s3c2410_wdt_variant drv_data_gs101_cl0 = {
  	.cnt_en_reg = GS_CLUSTER0_NONCPU_OUT,
  	.cnt_en_bit = 8,
  	.quirks = QUIRK_HAS_PMU_RST_STAT | QUIRK_HAS_PMU_MASK_RESET | QUIRK_HAS_PMU_CNT_EN |
-		  QUIRK_HAS_WTCLRINT_REG,
+		  QUIRK_HAS_WTCLRINT_REG | QUIRK_HAS_DBGACK_BIT,
  };
static const struct s3c2410_wdt_variant drv_data_gs101_cl1 = {
@@ -291,7 +296,7 @@ static const struct s3c2410_wdt_variant drv_data_gs101_cl1 = {
  	.cnt_en_reg = GS_CLUSTER1_NONCPU_OUT,
  	.cnt_en_bit = 7,
  	.quirks = QUIRK_HAS_PMU_RST_STAT | QUIRK_HAS_PMU_MASK_RESET | QUIRK_HAS_PMU_CNT_EN |
-		  QUIRK_HAS_WTCLRINT_REG,
+		  QUIRK_HAS_WTCLRINT_REG | QUIRK_HAS_DBGACK_BIT,
  };
static const struct of_device_id s3c2410_wdt_match[] = {
@@ -408,6 +413,21 @@ static int s3c2410wdt_enable(struct s3c2410_wdt *wdt, bool en)
  	return 0;
  }
+static void s3c2410wdt_mask_dbgack(struct s3c2410_wdt *wdt, bool mask)

I think I must be missing something. This is only ever called with mask==true,
meaning the bit, if present, is always set.

Why not call the function s3c2410wdt_set_dbgack() and drop the unnecessary
parameter ?

Guenter

+{
+	unsigned long wtcon;
+
+	if (!(wdt->drv_data->quirks & QUIRK_HAS_DBGACK_BIT))
+		return;
+
+	wtcon = readl(wdt->reg_base + S3C2410_WTCON);
+	if (mask)
+		wtcon |= S3C2410_WTCON_DBGACK_MASK;
+	else
+		wtcon &= ~S3C2410_WTCON_DBGACK_MASK;
+	writel(wtcon, wdt->reg_base + S3C2410_WTCON);
+}
+
  static int s3c2410wdt_keepalive(struct watchdog_device *wdd)
  {
  	struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);
@@ -737,6 +757,8 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
  	wdt->wdt_device.bootstatus = s3c2410wdt_get_bootstatus(wdt);
  	wdt->wdt_device.parent = dev;
+ s3c2410wdt_mask_dbgack(wdt, true);
+
  	/*
  	 * If "tmr_atboot" param is non-zero, start the watchdog right now. Also
  	 * set WDOG_HW_RUNNING bit, so that watchdog core can kick the watchdog.





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux