Re: [PATCH 2/3] USB: dwc3: qcom: fix wakeup after probe deferral

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Nov 20, 2023 at 05:16:06PM +0100, Johan Hovold wrote:
> The Qualcomm glue driver is overriding the interrupt trigger types
> defined by firmware when requesting the wakeup interrupts during probe.
> 
> This can lead to a failure to map the DP/DM wakeup interrupts after a
> probe deferral as the firmware defined trigger types do not match the
> type used for the initial mapping:
> 
> 	irq: type mismatch, failed to map hwirq-14 for interrupt-controller@b220000!
> 	irq: type mismatch, failed to map hwirq-15 for interrupt-controller@b220000!
> 
> Fix this by not overriding the firmware provided trigger types when
> requesting the wakeup interrupts.

This series looks good to me and makes sense except for one point that
I'm struggling to understand. What exactly is the relationship with this
failure and probe deferral?

Thanks,
Andrew

> 
> Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver")
> Cc: stable@xxxxxxxxxxxxxxx      # 4.18
> Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
> ---
>  drivers/usb/dwc3/dwc3-qcom.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index 10fb481d943b..82544374110b 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -549,7 +549,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
>  		irq_set_status_flags(irq, IRQ_NOAUTOEN);
>  		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
>  					qcom_dwc3_resume_irq,
> -					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> +					IRQF_ONESHOT,
>  					"qcom_dwc3 HS", qcom);
>  		if (ret) {
>  			dev_err(qcom->dev, "hs_phy_irq failed: %d\n", ret);
> @@ -564,7 +564,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
>  		irq_set_status_flags(irq, IRQ_NOAUTOEN);
>  		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
>  					qcom_dwc3_resume_irq,
> -					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> +					IRQF_ONESHOT,
>  					"qcom_dwc3 DP_HS", qcom);
>  		if (ret) {
>  			dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret);
> @@ -579,7 +579,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
>  		irq_set_status_flags(irq, IRQ_NOAUTOEN);
>  		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
>  					qcom_dwc3_resume_irq,
> -					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> +					IRQF_ONESHOT,
>  					"qcom_dwc3 DM_HS", qcom);
>  		if (ret) {
>  			dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret);
> @@ -594,7 +594,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
>  		irq_set_status_flags(irq, IRQ_NOAUTOEN);
>  		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
>  					qcom_dwc3_resume_irq,
> -					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> +					IRQF_ONESHOT,
>  					"qcom_dwc3 SS", qcom);
>  		if (ret) {
>  			dev_err(qcom->dev, "ss_phy_irq failed: %d\n", ret);
> -- 
> 2.41.0
> 
> 





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux