From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx> There are 2 TITSR registers available on IA55 interrupt controller. A single macro could be used to access both of them. Add a macro that retrieves TITSR register offset based on it's index. This macro is useful in commit that adds suspend/resume support to access both TITSR registers in a for loop. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx> --- drivers/irqchip/irq-renesas-rzg2l.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/irqchip/irq-renesas-rzg2l.c b/drivers/irqchip/irq-renesas-rzg2l.c index a77ac6e1606f..45b696db220f 100644 --- a/drivers/irqchip/irq-renesas-rzg2l.c +++ b/drivers/irqchip/irq-renesas-rzg2l.c @@ -28,8 +28,7 @@ #define ISCR 0x10 #define IITSR 0x14 #define TSCR 0x20 -#define TITSR0 0x24 -#define TITSR1 0x28 +#define TITSR(n) (0x24 + (n) * 4) #define TITSR0_MAX_INT 16 #define TITSEL_WIDTH 0x2 #define TSSR(n) (0x30 + ((n) * 4)) @@ -200,8 +199,7 @@ static int rzg2l_tint_set_edge(struct irq_data *d, unsigned int type) struct rzg2l_irqc_priv *priv = irq_data_to_priv(d); unsigned int hwirq = irqd_to_hwirq(d); u32 titseln = hwirq - IRQC_TINT_START; - u32 offset; - u8 sense; + u8 index, sense; u32 reg; switch (type & IRQ_TYPE_SENSE_MASK) { @@ -217,17 +215,17 @@ static int rzg2l_tint_set_edge(struct irq_data *d, unsigned int type) return -EINVAL; } - offset = TITSR0; + index = 0; if (titseln >= TITSR0_MAX_INT) { titseln -= TITSR0_MAX_INT; - offset = TITSR1; + index = 1; } raw_spin_lock(&priv->lock); - reg = readl_relaxed(priv->base + offset); + reg = readl_relaxed(priv->base + TITSR(index)); reg &= ~(IRQ_MASK << (titseln * TITSEL_WIDTH)); reg |= sense << (titseln * TITSEL_WIDTH); - writel_relaxed(reg, priv->base + offset); + writel_relaxed(reg, priv->base + TITSR(index)); raw_spin_unlock(&priv->lock); return 0; -- 2.39.2