Hi, During system suspend L3INIT_960M_GFCLK and L3INIT_480M_GFCLK clocks remain active on the DRA7 platform. This is because the pipe3 driver doesn't shut them off as part of .suspend(). Patch 1 addresses this issue. SATA on both OMAP5 and DRA7 breaks when SATA drive is plugged in after a system suspend/resume or if AHCI_PLATFORM driver is used as module. Patches 2,3,4 fix it. Hope to get these patches in through the 3.19-rc cycle. Tony, Do you wish to take the DTS patches or let them go in through PHY tree? cheers, -roger --- Changelog - v3 : Commit message updated. dts changes moved to separate patch. - v2 : Don't break SATA with old DTB. Roger Quadros (4): phy: ti-pipe3: Disable clocks on system suspend phy: ti-pipe3: Fix SATA across suspend/resume ARM: dts: DRA7: Fix SATA PHY node ARM: dts: OMAP5: Fix SATA PHY node arch/arm/boot/dts/dra7.dtsi | 4 +- arch/arm/boot/dts/omap5.dtsi | 4 +- drivers/phy/phy-ti-pipe3.c | 142 +++++++++++++++++++++++++++++++++---------- 3 files changed, 115 insertions(+), 35 deletions(-) -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
