This removes a dependency on the parent node being a syscon node.
Convert from mmio-mux to reg-mux adjusting node name and properties
as needed.
Signed-off-by: Andrew Davis <afd@xxxxxx>
---
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index e5597724076c4..918c3e96b1e9e 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -58,11 +58,11 @@ phy_gmii_sel_cpsw: phy@34 {
};
serdes_ln_ctrl: mux-controller@80 {
- compatible = "mmio-mux";
+ compatible = "reg-mux";
reg = <0x80 0x10>;
#mux-control-cells = <1>;
- mux-reg-masks = <0x80 0x3>, <0x84 0x3>, /* SERDES0 lane0/1 select */
- <0x88 0x3>, <0x8c 0x3>; /* SERDES0 lane2/3 select */
+ mux-reg-masks = <0x0 0x3>, <0x4 0x3>, /* SERDES0 lane0/1 select */
+ <0x8 0x3>, <0xc 0x3>; /* SERDES0 lane2/3 select */
};
ehrpwm_tbclk: clock-controller@140 {
--
2.39.2
