Like in other K3 SoCs the chipid register is inside the wakeup
configuration space. Move the chipid node under a new bus to
better represent this topology and match other similar SoCs.
Signed-off-by: Andrew Davis <afd@xxxxxx>
---
arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 3fc588b848c61..672cb2acc1be9 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -178,9 +178,16 @@ phy_gmii_sel: phy@4040 {
};
};
- chipid@43000014 {
- compatible = "ti,am654-chipid";
- reg = <0x00 0x43000014 0x00 0x4>;
+ wkup_conf: bus@43000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x00 0x43000000 0x20000>;
+
+ chipid: chipid@14 {
+ compatible = "ti,am654-chipid";
+ reg = <0x14 0x4>;
+ };
};
/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
--
2.39.2
