Hi,
Am Mittwoch, 15. November 2023, 22:04:17 CET schrieb shironeko:
just if you need to resend, the patch subject could please
mention both the gmac and rk3328 :-)
> Without fifo depths attempting to change the MTU will fail. These values
> are from the RK3328 Technical Reference Manual, briefly tested with Rock64.
>
> Signed-off-by: shironeko <shironeko@xxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/rockchip/rk3328.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> index e729e7a22b23..1573250ac24e 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> @@ -916,6 +916,8 @@ gmac2io: ethernet@ff540000 {
> resets = <&cru SRST_GMAC2IO_A>;
> reset-names = "stmmaceth";
> rockchip,grf = <&grf>;
> + tx-fifo-depth = <2048>;
> + rx-fifo-depth = <4096>;
> snps,txpbl = <0x4>;
> status = "disabled";
> };
>
hmm, what about the other gmac-interface (gmac2phy).
Does the TRM provide depth information for that too?
Thanks
Heiko
