From: Rafał Miłecki <rafal@xxxxxxxxxx>
This helps validating DTS files.
Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
---
.../bindings/thermal/mediatek-thermal.txt | 52 ----------
.../bindings/thermal/mediatek-thermal.yaml | 98 +++++++++++++++++++
2 files changed, 98 insertions(+), 52 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
create mode 100644 Documentation/devicetree/bindings/thermal/mediatek-thermal.yaml
diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
deleted file mode 100644
index ac39c7156fde..000000000000
--- a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* Mediatek Thermal
-
-This describes the device tree binding for the Mediatek thermal controller
-which measures the on-SoC temperatures. This device does not have its own ADC,
-instead it directly controls the AUXADC via AHB bus accesses. For this reason
-this device needs phandles to the AUXADC. Also it controls a mux in the
-apmixedsys register space via AHB bus accesses, so a phandle to the APMIXEDSYS
-is also needed.
-
-Required properties:
-- compatible:
- - "mediatek,mt8173-thermal" : For MT8173 family of SoCs
- - "mediatek,mt2701-thermal" : For MT2701 family of SoCs
- - "mediatek,mt2712-thermal" : For MT2712 family of SoCs
- - "mediatek,mt7622-thermal" : For MT7622 SoC
- - "mediatek,mt7981-thermal", "mediatek,mt7986-thermal" : For MT7981 SoC
- - "mediatek,mt7986-thermal" : For MT7986 SoC
- - "mediatek,mt8183-thermal" : For MT8183 family of SoCs
- - "mediatek,mt8365-thermal" : For MT8365 family of SoCs
- - "mediatek,mt8516-thermal", "mediatek,mt2701-thermal : For MT8516 family of SoCs
-- reg: Address range of the thermal controller
-- interrupts: IRQ for the thermal controller
-- clocks, clock-names: Clocks needed for the thermal controller. required
- clocks are:
- "therm": Main clock needed for register access
- "auxadc": The AUXADC clock
-- mediatek,auxadc: A phandle to the AUXADC which the thermal controller uses
-- mediatek,apmixedsys: A phandle to the APMIXEDSYS controller.
-- #thermal-sensor-cells : Should be 0. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
-
-Optional properties:
-- resets: Reference to the reset controller controlling the thermal controller.
-- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
- unspecified default values shall be used.
-- nvmem-cell-names: Should be "calibration-data"
-
-Example:
-
- thermal: thermal@1100b000 {
- #thermal-sensor-cells = <1>;
- compatible = "mediatek,mt8173-thermal";
- reg = <0 0x1100b000 0 0x1000>;
- interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
- clock-names = "therm", "auxadc";
- resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
- reset-names = "therm";
- mediatek,auxadc = <&auxadc>;
- mediatek,apmixedsys = <&apmixedsys>;
- nvmem-cells = <&thermal_calibration_data>;
- nvmem-cell-names = "calibration-data";
- };
diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.yaml b/Documentation/devicetree/bindings/thermal/mediatek-thermal.yaml
new file mode 100644
index 000000000000..0e036b22b82b
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/mediatek-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Thermal
+
+description: >
+ This describes the device tree binding for the Mediatek thermal controller
+ which measures the on-SoC temperatures. This device does not have its own ADC,
+ instead it directly controls the AUXADC via AHB bus accesses. For this reason
+ this device needs phandles to the AUXADC. Also it controls a mux in the
+ apmixedsys register space via AHB bus accesses, so a phandle to the APMIXEDSYS
+ is also needed.
+
+allOf:
+ - $ref: thermal-sensor.yaml#
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt2701-thermal
+ - mediatek,mt2712-thermal
+ - mediatek,mt7622-thermal
+ - mediatek,mt7981-thermal
+ - mediatek,mt7986-thermal
+ - mediatek,mt8173-thermal
+ - mediatek,mt8183-thermal
+ - mediatek,mt8365-thermal
+ - mediatek,mt8516-thermal
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Main clock needed for register access
+ - description: The AUXADC clock
+
+ clock-names:
+ items:
+ - const: therm
+ - const: auxadc
+
+ mediatek,auxadc:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: A phandle to the AUXADC which the thermal controller uses
+
+ mediatek,apmixedsys:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: A phandle to the APMIXEDSYS controller
+
+ resets: Reference to the reset controller controlling the thermal controller.
+
+ nvmem-cells:
+ items:
+ - description: >
+ NVMEM cell with EEPROMA phandle to the calibration data provided by an
+ NVMEM device. If unspecified default values shall be used.
+
+ nvmem-cell-names:
+ items:
+ - const: calibration-data
+
+unevaluatedProperties: false
+
+required:
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - mediatek,auxadc
+ - mediatek,apmixedsys
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/reset/mt8173-resets.h>
+
+ thermal@1100b000 {
+ compatible = "mediatek,mt8173-thermal";
+ reg = <0x1100b000 0x1000>;
+ interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
+ clock-names = "therm", "auxadc";
+ resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
+ reset-names = "therm";
+ mediatek,auxadc = <&auxadc>;
+ mediatek,apmixedsys = <&apmixedsys>;
+ nvmem-cells = <&thermal_calibration_data>;
+ nvmem-cell-names = "calibration-data";
+ #thermal-sensor-cells = <1>;
+ };
--
2.35.3
