[PATCH v7 1/2] dt-bindings: backlight: mp3309c: remove two required properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The two properties:

- max-brightness
- default brightness

are not really required, so they can be removed from the "required"
section.
The "max-brightness" is no longer used in the current version
of the driver (it was used only in the first version).
The "default-brightness", if omitted in the DT, is managed by the
device driver, using a default value. This value depends on the dimming
mode used:

- for the "analog mode", via I2C commands, this value is fixed by
  hardware (=31)
- while in case of pwm mode the default used is the last value of the
  brightness-levels array.

Also the brightness-levels array is not required:

- in "analog mode", via I2C commands, the brightness-level array is
  fixed by hardware (0..31).;
- in pwm dimming mode, the driver uses a default array of 0..255 and
  the "default-brightness" is the last one, which is "255"

NOTE: there are no compatibility problems with the previous version,
      since the device driver has not yet been included in any kernel.
      Only this dt-binding yaml file is already included in the current
      v6.7.0-rc1 kernel version.
      No developer may have used it.

Other changes:

- improve the backlight working mode description, in the "description"
  section
- update the example, removing the "max-brightness" and introducing the
  "brightess-levels" property

Signed-off-by: Flavio Suligoi <f.suligoi@xxxxxxx>
Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
---

v7:
 - add missed patch history
 - add missed "Acked-by" added in one of the previous version
v6:
 - check and resend for updated kernel 6.7.0-rc1 (nothing changed compared
   to the previous versions)
 - add this patch to the same patchset of the MP3309C device driver
   Note: the patch related to this file was previously a separate patch and
          sent in two versions (v1 and v2).
          It has now been included in this patchset, starting with the
          version v6.
v5...v3:
 - non-existing versions (the last was v2, the next is v6)
v2:
 - add more explanations in commit message, about the the non-existence of
   compatibility issues with the previous versions of the yaml file
v1:
 - first version

 .../bindings/leds/backlight/mps,mp3309c.yaml           | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
index 4191e33626f5..527a37368ed7 100644
--- a/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
@@ -14,8 +14,8 @@ description: |
   programmable switching frequency to optimize efficiency.
   It supports two different dimming modes:
 
-  - analog mode, via I2C commands (default)
-  - PWM controlled mode.
+  - analog mode, via I2C commands, as default mode (32 dimming levels)
+  - PWM controlled mode (optional)
 
   The datasheet is available at:
   https://www.monolithicpower.com/en/mp3309c.html
@@ -50,8 +50,6 @@ properties:
 required:
   - compatible
   - reg
-  - max-brightness
-  - default-brightness
 
 unevaluatedProperties: false
 
@@ -66,8 +64,8 @@ examples:
             compatible = "mps,mp3309c";
             reg = <0x17>;
             pwms = <&pwm1 0 3333333 0>; /* 300 Hz --> (1/f) * 1*10^9 */
-            max-brightness = <100>;
-            default-brightness = <80>;
+            brightness-levels = <0 4 8 16 32 64 128 255>;
+            default-brightness = <6>;
             mps,overvoltage-protection-microvolt = <24000000>;
         };
     };
-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux