Re: [PATCH v5] can: Convert to runtime_pm

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 01/12/2015 04:04 PM, Kedareswara rao Appana wrote:
> Instead of enabling/disabling clocks at several locations in the driver,
> Use the runtime_pm framework. This consolidates the actions for runtime PM
> In the appropriate callbacks and makes the driver more readable and mantainable.
> 
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xxxxxxxxxx>
> Signed-off-by: Kedareswara rao Appana <appanad@xxxxxxxxxx>

FTBFS:

> drivers/net/can/xilinx_can.c:1064:9: error: undefined identifier 'SET_PM_RUNTIME_PM_OPS'
>   CC [M]  drivers/net/can/xilinx_can.o
> drivers/net/can/xilinx_can.c:1064:2: error: implicit declaration of function ‘SET_PM_RUNTIME_PM_OPS’ [-Werror=implicit-function-declaration]
>   SET_PM_RUNTIME_PM_OPS(xcan_runtime_suspend, xcan_runtime_resume, NULL)
>   ^
> drivers/net/can/xilinx_can.c:1065:1: error: initializer element is not constant
>  };
>  ^
> drivers/net/can/xilinx_can.c:1065:1: error: (near initialization for ‘xcan_dev_pm_ops.prepare’)

Have a look at commit 40bd62c6194bdee1bc6652b3b0aa28e34883f603:

More comments inline. Looks quite good now.

>     PM: Remove the SET_PM_RUNTIME_PM_OPS() macro
> 
>     There're now no users left of the SET_PM_RUNTIME_PM_OPS() macro, since
>     all have converted to use the SET_RUNTIME_PM_OPS() macro instead, so
>     let's remove it.
> ---
> Changes for v5:
>  - Updated with the review comments.
>    Updated the remove fuction to use runtime_pm.
> Chnages for v4:
>  - Updated with the review comments.
> Changes for v3:
>   - Converted the driver to use runtime_pm.
> Changes for v2:
>   - Removed the struct platform_device* from suspend/resume
>     as suggest by Lothar.
> 
>  drivers/net/can/xilinx_can.c |  157 ++++++++++++++++++++++++++++-------------
>  1 files changed, 107 insertions(+), 50 deletions(-)
> 
> diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
> index 6c67643..67aef00 100644
> --- a/drivers/net/can/xilinx_can.c
> +++ b/drivers/net/can/xilinx_can.c
> @@ -32,6 +32,7 @@
>  #include <linux/can/dev.h>
>  #include <linux/can/error.h>
>  #include <linux/can/led.h>
> +#include <linux/pm_runtime.h>
>  
>  #define DRIVER_NAME	"xilinx_can"
>  
> @@ -138,7 +139,7 @@ struct xcan_priv {
>  	u32 (*read_reg)(const struct xcan_priv *priv, enum xcan_reg reg);
>  	void (*write_reg)(const struct xcan_priv *priv, enum xcan_reg reg,
>  			u32 val);
> -	struct net_device *dev;
> +	struct device *dev;
>  	void __iomem *reg_base;
>  	unsigned long irq_flags;
>  	struct clk *bus_clk;
> @@ -842,6 +843,13 @@ static int xcan_open(struct net_device *ndev)
>  	struct xcan_priv *priv = netdev_priv(ndev);
>  	int ret;
>  
> +	ret = pm_runtime_get_sync(priv->dev);
> +	if (ret < 0) {
> +		netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n",
> +				__func__, ret);
> +		return ret;
> +	}
> +
>  	ret = request_irq(ndev->irq, xcan_interrupt, priv->irq_flags,
>  			ndev->name, ndev);
>  	if (ret < 0) {
> @@ -849,29 +857,17 @@ static int xcan_open(struct net_device *ndev)
>  		goto err;
>  	}
>  
> -	ret = clk_prepare_enable(priv->can_clk);
> -	if (ret) {
> -		netdev_err(ndev, "unable to enable device clock\n");
> -		goto err_irq;
> -	}
> -
> -	ret = clk_prepare_enable(priv->bus_clk);
> -	if (ret) {
> -		netdev_err(ndev, "unable to enable bus clock\n");
> -		goto err_can_clk;
> -	}
> -
>  	/* Set chip into reset mode */
>  	ret = set_reset_mode(ndev);
>  	if (ret < 0) {
>  		netdev_err(ndev, "mode resetting failed!\n");
> -		goto err_bus_clk;
> +		goto err_irq;
>  	}
>  
>  	/* Common open */
>  	ret = open_candev(ndev);
>  	if (ret)
> -		goto err_bus_clk;
> +		goto err_irq;
>  
>  	ret = xcan_chip_start(ndev);
>  	if (ret < 0) {
> @@ -887,13 +883,11 @@ static int xcan_open(struct net_device *ndev)
>  
>  err_candev:
>  	close_candev(ndev);
> -err_bus_clk:
> -	clk_disable_unprepare(priv->bus_clk);
> -err_can_clk:
> -	clk_disable_unprepare(priv->can_clk);
>  err_irq:
>  	free_irq(ndev->irq, ndev);
>  err:
> +	pm_runtime_put(priv->dev);
> +
>  	return ret;
>  }
>  
> @@ -910,12 +904,11 @@ static int xcan_close(struct net_device *ndev)
>  	netif_stop_queue(ndev);
>  	napi_disable(&priv->napi);
>  	xcan_chip_stop(ndev);
> -	clk_disable_unprepare(priv->bus_clk);
> -	clk_disable_unprepare(priv->can_clk);
>  	free_irq(ndev->irq, ndev);
>  	close_candev(ndev);
>  
>  	can_led_event(ndev, CAN_LED_EVENT_STOP);
> +	pm_runtime_put(priv->dev);
>  
>  	return 0;
>  }
> @@ -934,27 +927,20 @@ static int xcan_get_berr_counter(const struct net_device *ndev,
>  	struct xcan_priv *priv = netdev_priv(ndev);
>  	int ret;
>  
> -	ret = clk_prepare_enable(priv->can_clk);
> -	if (ret)
> -		goto err;
> -
> -	ret = clk_prepare_enable(priv->bus_clk);
> -	if (ret)
> -		goto err_clk;
> +	ret = pm_runtime_get_sync(priv->dev);
> +	if (ret < 0) {
> +		netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n",
> +				__func__, ret);
> +		return ret;
> +	}
>  
>  	bec->txerr = priv->read_reg(priv, XCAN_ECR_OFFSET) & XCAN_ECR_TEC_MASK;
>  	bec->rxerr = ((priv->read_reg(priv, XCAN_ECR_OFFSET) &
>  			XCAN_ECR_REC_MASK) >> XCAN_ESR_REC_SHIFT);
>  
> -	clk_disable_unprepare(priv->bus_clk);
> -	clk_disable_unprepare(priv->can_clk);
> +	pm_runtime_put(priv->dev);
>  
>  	return 0;
> -
> -err_clk:
> -	clk_disable_unprepare(priv->can_clk);
> -err:
> -	return ret;
>  }
>  
>  
> @@ -967,15 +953,45 @@ static const struct net_device_ops xcan_netdev_ops = {
>  
>  /**
>   * xcan_suspend - Suspend method for the driver
> - * @dev:	Address of the platform_device structure
> + * @dev:	Address of the device structure
>   *
>   * Put the driver into low power mode.
> - * Return: 0 always
> + * Return: 0 on success and failure value on error
>   */
>  static int __maybe_unused xcan_suspend(struct device *dev)
>  {
> -	struct platform_device *pdev = dev_get_drvdata(dev);
> -	struct net_device *ndev = platform_get_drvdata(pdev);
> +	if (!device_may_wakeup(dev))
> +		return pm_runtime_force_suspend(dev);
> +
> +	return 0;
> +}
> +
> +/**
> + * xcan_resume - Resume from suspend
> + * @dev:	Address of the device structure
> + *
> + * Resume operation after suspend.
> + * Return: 0 on success and failure value on error
> + */
> +static int __maybe_unused xcan_resume(struct device *dev)
> +{
> +	if (!device_may_wakeup(dev))
> +		return pm_runtime_force_resume(dev);
> +
> +	return 0;
> +
> +}
> +
> +/**
> + * xcan_runtime_suspend - Runtime suspend method for the driver
> + * @dev:	Address of the device structure
> + *
> + * Put the driver into low power mode.
> + * Return: 0 always
> + */
> +static int __maybe_unused xcan_runtime_suspend(struct device *dev)
> +{
> +	struct net_device *ndev = dev_get_drvdata(dev);
>  	struct xcan_priv *priv = netdev_priv(ndev);
>  
>  	if (netif_running(ndev)) {
> @@ -993,18 +1009,18 @@ static int __maybe_unused xcan_suspend(struct device *dev)
>  }
>  
>  /**
> - * xcan_resume - Resume from suspend
> - * @dev:	Address of the platformdevice structure
> + * xcan_runtime_resume - Runtime resume from suspend
> + * @dev:	Address of the device structure
>   *
>   * Resume operation after suspend.
>   * Return: 0 on success and failure value on error
>   */
> -static int __maybe_unused xcan_resume(struct device *dev)
> +static int __maybe_unused xcan_runtime_resume(struct device *dev)
>  {
> -	struct platform_device *pdev = dev_get_drvdata(dev);
> -	struct net_device *ndev = platform_get_drvdata(pdev);
> +	struct net_device *ndev = dev_get_drvdata(dev);
>  	struct xcan_priv *priv = netdev_priv(ndev);
>  	int ret;
> +	u32 isr, status;
>  
>  	ret = clk_enable(priv->bus_clk);
>  	if (ret) {
> @@ -1014,15 +1030,28 @@ static int __maybe_unused xcan_resume(struct device *dev)
>  	ret = clk_enable(priv->can_clk);
>  	if (ret) {
>  		dev_err(dev, "Cannot enable clock.\n");
> -		clk_disable_unprepare(priv->bus_clk);
> +		clk_disable(priv->bus_clk);
>  		return ret;
>  	}
>  
>  	priv->write_reg(priv, XCAN_MSR_OFFSET, 0);
>  	priv->write_reg(priv, XCAN_SRR_OFFSET, XCAN_SRR_CEN_MASK);
> -	priv->can.state = CAN_STATE_ERROR_ACTIVE;
> +	isr = priv->read_reg(priv, XCAN_ISR_OFFSET);
> +	status = priv->read_reg(priv, XCAN_SR_OFFSET);
>  
>  	if (netif_running(ndev)) {
> +		if (isr & XCAN_IXR_BSOFF_MASK) {
> +			priv->can.state = CAN_STATE_BUS_OFF;
> +			priv->write_reg(priv, XCAN_SRR_OFFSET,
> +					XCAN_SRR_RESET_MASK);
> +		} else if ((status & XCAN_SR_ESTAT_MASK) ==
> +					XCAN_SR_ESTAT_MASK) {
> +			priv->can.state = CAN_STATE_ERROR_PASSIVE;
> +		} else if (status & XCAN_SR_ERRWRN_MASK) {
> +			priv->can.state = CAN_STATE_ERROR_WARNING;
> +		} else {
> +			priv->can.state = CAN_STATE_ERROR_ACTIVE;
> +		}
>  		netif_device_attach(ndev);
>  		netif_start_queue(ndev);
>  	}
> @@ -1030,7 +1059,10 @@ static int __maybe_unused xcan_resume(struct device *dev)
>  	return 0;
>  }
>  
> -static SIMPLE_DEV_PM_OPS(xcan_dev_pm_ops, xcan_suspend, xcan_resume);
> +static const struct dev_pm_ops xcan_dev_pm_ops = {
> +	SET_SYSTEM_SLEEP_PM_OPS(xcan_suspend, xcan_resume)
> +	SET_PM_RUNTIME_PM_OPS(xcan_runtime_suspend, xcan_runtime_resume, NULL)
> +};
>  
>  /**
>   * xcan_probe - Platform registration call
> @@ -1071,7 +1103,7 @@ static int xcan_probe(struct platform_device *pdev)
>  		return -ENOMEM;
>  
>  	priv = netdev_priv(ndev);
> -	priv->dev = ndev;
> +	priv->dev = &pdev->dev;
>  	priv->can.bittiming_const = &xcan_bittiming_const;
>  	priv->can.do_set_mode = xcan_do_set_mode;
>  	priv->can.do_get_berr_counter = xcan_get_berr_counter;
> @@ -1137,6 +1169,16 @@ static int xcan_probe(struct platform_device *pdev)
>  
>  	netif_napi_add(ndev, &priv->napi, xcan_rx_poll, rx_max);
>  
> +	pm_runtime_set_active(&pdev->dev);
> +	pm_runtime_irq_safe(&pdev->dev);
> +	pm_runtime_enable(&pdev->dev);
> +	ret = pm_runtime_get_sync(&pdev->dev);
> +	if (ret < 0) {
> +		netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n",
> +			__func__, ret);
> +		goto err_pmdisable;

after err_pmdisable is a runtime_put(), your cleanup is broken.

> +	}
> +
>  	ret = register_candev(ndev);
>  	if (ret) {
>  		dev_err(&pdev->dev, "fail to register failed (err=%d)\n", ret);
> 		goto err_unprepare_disable_busclk;

I think you have to adjust the jump label.

> 	}
> 
> 	devm_can_led_init(ndev);
> 
> 	pm_runtime_put(&pdev->dev);



> @@ -1144,15 +1186,19 @@ static int xcan_probe(struct platform_device *pdev)
>  	}
>  
>  	devm_can_led_init(ndev);
> -	clk_disable_unprepare(priv->bus_clk);
> -	clk_disable_unprepare(priv->can_clk);
> +
> +	pm_runtime_put(&pdev->dev);
> +
>  	netdev_dbg(ndev, "reg_base=0x%p irq=%d clock=%d, tx fifo depth:%d\n",
>  			priv->reg_base, ndev->irq, priv->can.clock.freq,
>  			priv->tx_max);
>  
>  	return 0;
>  
> +err_pmdisable:
> +	pm_runtime_disable(&pdev->dev);
>  err_unprepare_disable_busclk:
> +	pm_runtime_put(priv->dev);

This cleanup is not correct.

>  	clk_disable_unprepare(priv->bus_clk);
>  err_unprepare_disable_dev:
>  	clk_disable_unprepare(priv->can_clk);
> @@ -1173,12 +1219,23 @@ static int xcan_remove(struct platform_device *pdev)
>  {
>  	struct net_device *ndev = platform_get_drvdata(pdev);
>  	struct xcan_priv *priv = netdev_priv(ndev);
> +	int ret;
> +
> +	ret = pm_runtime_get_sync(&pdev->dev);
> +	if (ret < 0) {
> +		netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n",
> +				__func__, ret);
> +		return ret;
> +	}
>  
>  	if (set_reset_mode(ndev) < 0)
>  		netdev_err(ndev, "mode resetting failed!\n");
>  
>  	unregister_candev(ndev);
> +	pm_runtime_disable(&pdev->dev);
>  	netif_napi_del(&priv->napi);
> +	clk_disable_unprepare(priv->bus_clk);
> +	clk_disable_unprepare(priv->can_clk);
>  	free_candev(ndev);
>  
>  	return 0;
> 

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

Attachment: signature.asc
Description: OpenPGP digital signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux