On 12.01.15 09:03, Ding Tianhong wrote:
> Support Hisilicon hip04 ethernet driver, including 100M / 1000M controller.
> The controller has no tx done interrupt, reclaim xmitted buffer in the poll.
>
> v11: Add ethtool support for tx coalecse getting and setting, the xmit_more
> is not supported for this patch, but I think it could work for hip04,
> will support it later after some tests for performance better.
>
> Here are some performance test results by ping and iperf(add tx_coalesce_frames/users),
> it looks that the performance and latency is more better by tx_coalesce_frames/usecs.
>
> - Before:
> $ ping 192.168.1.1 ...
> --- 192.168.1.1 ping statistics ---
Writing --- directly into your patch description is usually a pretty bad
idea. Git am cuts off everything that comes after --- so your patch
description ends here without manual intervention ;).
> 24 packets transmitted, 24 received, 0% packet loss, time 22999ms
> rtt min/avg/max/mdev = 0.180/0.202/0.403/0.043 ms
>
> $ iperf -c 192.168.1.1 ...
> [ ID] Interval Transfer Bandwidth
> [ 3] 0.0- 1.0 sec 115 MBytes 945 Mbits/sec
>
> - After:
> $ ping 192.168.1.1 ...
> --- 192.168.1.1 ping statistics ---
> 24 packets transmitted, 24 received, 0% packet loss, time 22999ms
> rtt min/avg/max/mdev = 0.178/0.190/0.380/0.041 ms
>
> $ iperf -c 192.168.1.1 ...
> [ ID] Interval Transfer Bandwidth
> [ 3] 0.0- 1.0 sec 115 MBytes 965 Mbits/sec
>
> v10: According David Miller and Arnd Bergmann's suggestion, add some modification
Version history however should go after a --- line, so that it doesn't
show up in the patch description in the tree.
> for v9 version
> - drop the workqueue
> - batch cleanup based on tx_coalesce_frames/usecs for better throughput
> - use a reasonable default tx timeout (200us, could be shorted
> based on measurements) with a range timer
> - fix napi poll function return value
> - use a lockless queue for cleanup
>
> Signed-off-by: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx>
> Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
> Signed-off-by: Ding Tianhong <dingtianhong@xxxxxxxxxx>
> ---
[...]
> +static int hip04_remove(struct platform_device *pdev)
> +{
> + struct net_device *ndev = platform_get_drvdata(pdev);
> + struct hip04_priv *priv = netdev_priv(ndev);
> + struct device *d = &pdev->dev;
> +
> + if (priv->phy)
> + phy_disconnect(priv->phy);
> +
> + hip04_free_ring(ndev, d);
> + unregister_netdev(ndev);
> + free_irq(ndev->irq, ndev);
> + of_node_put(priv->phy_node);
> + cancel_work_sync(&priv->tx_timeout_task);
> + free_netdev(ndev);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id hip04_mac_match[] = {
> + { .compatible = "hisilicon,hip04-mac" },
> + { }
> +};
This is missing
MODULE_DEVICE_TABLE(of, hip04_mac_match);
to enable automatic module loading, no?
Alex
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
