The CSI2RX subsystem can be used to capture video frames from CSI-2 cameras. Add nodes for the CSI core, SHIM layer, and the DPHY. Signed-off-by: Jai Luthra <j-luthra@xxxxxx> --- arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 62 ++++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi index e5c64c86d1d5..c0a95f6aff5e 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi @@ -965,4 +965,66 @@ mcasp2: audio-controller@2b20000 { power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>; status = "disabled"; }; + + ti_csi2rx0: ticsi2rx@30102000 { + compatible = "ti,j721e-csi2rx-shim"; + dmas = <&main_bcdma 0 0x4700 0>; + dma-names = "rx0"; + reg = <0x00 0x30102000 0x00 0x1000>; + power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + cdns_csi2rx0: csi-bridge@30101000 { + compatible = "ti,j721e-csi2rx", "cdns,csi2rx"; + reg = <0x00 0x30101000 0x00 0x1000>; + clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>, + <&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>; + clock-names = "sys_clk", "p_clk", "pixel_if0_clk", + "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk"; + phys = <&dphy0>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi0_port0: port@0 { + reg = <0>; + status = "disabled"; + }; + + csi0_port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + csi0_port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + csi0_port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + csi0_port4: port@4 { + reg = <4>; + status = "disabled"; + }; + }; + }; + }; + + dphy0: phy@30110000 { + compatible = "cdns,dphy-rx"; + reg = <0x00 0x30110000 0x00 0x1100>; + #phy-cells = <0>; + power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + }; -- 2.42.1