From: Fabio Estevam <festevam@xxxxxxx> The property 'phy-connection-type' can also be used to describe the interface type between the Ethernet device and the Ethernet PHY device. Mark 'phy-mode' as a non required property. This fixes the following schema warning: imx8mp-debix-model-a.dtb: ethernet@30bf0000: 'phy-mode' is a required property from schema $id: http://devicetree.org/schemas/net/snps,dwmac.yaml# Signed-off-by: Fabio Estevam <festevam@xxxxxxx> --- Documentation/devicetree/bindings/net/snps,dwmac.yaml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 5c2769dc689a..6c0d9e694d76 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -505,6 +505,10 @@ properties: required: - compatible + phy-connection-type: true + + phy-mode: true + stmmac-axi-config: type: object unevaluatedProperties: false @@ -564,7 +568,6 @@ required: - reg - interrupts - interrupt-names - - phy-mode dependencies: snps,reset-active-low: ["snps,reset-gpio"] -- 2.34.1