Add description of the USB-C AltModes supported on the particular USB-C
connector. This is required for devices like Qualcomm Robotics RB5,
which have no other way to express alternative modes supported by the
hardware platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
.../bindings/connector/usb-connector.yaml | 35 +++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
index 7c8a3e8430d3..9922622abf51 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -14,6 +14,30 @@ description:
of a USB interface controller or a separate node when it is attached to both
MUX and USB interface controller.
+$defs:
+ altmode-desc:
+ type: object
+ description:
+ A single USB-C Alternative Mode as supported by the USB-C connector logic.
+ properties:
+ svid:
+ $ref: /schemas/types.yaml#/definitions/uint16
+ description: Unique value assigned by USB-IF to the Vendor / AltMode.
+ vdo:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: VDO returned by Discover Modes USB PD command.
+
+ altmodes-list:
+ descrption: List of Alternative Modes supported by the schematics on the
+ particular device. This is only necessary if there are no other means to
+ discover supported alternative modes (e.g. through the UCSI firmware
+ interface).
+
+ patternProperties:
+ "^[a-z][a-z0-9]*$":
+ $ref: "#/$defs/altmode-desc"
+ unevaluatedProperties: false
+
properties:
compatible:
oneOf:
@@ -171,6 +195,10 @@ properties:
offer the power, Capability Mismatch is set. Required for power sink and
power dual role.
+ altmodes:
+ $ref: "#/$defs/altmodes-list"
+ unevaluatedProperties: false
+
port:
$ref: /schemas/graph.yaml#/properties/port
description: OF graph bindings modeling a data bus to the connector, e.g.
@@ -289,6 +317,13 @@ examples:
compatible = "usb-c-connector";
label = "USB-C";
+ altmodes {
+ displayport {
+ svid = /bits/ 16 <0xff01>;
+ vdo = <0x00001c46>;
+ };
+ };
+
ports {
#address-cells = <1>;
#size-cells = <0>;
--
2.42.0
