Hi Jisheng:
On 08:55 Mon 13 Nov , Jisheng Zhang wrote:
> Add the reset device tree node to cv1800b SoC.
>
> Signed-off-by: Jisheng Zhang <jszhang@xxxxxxxxxx>
> ---
> arch/riscv/boot/dts/sophgo/cv1800b.dtsi | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> index df40e87ee063..4032419486be 100644
> --- a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> +++ b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> @@ -54,6 +54,12 @@ soc {
> dma-noncoherent;
> ranges;
>
> + rst: reset-controller@3003000 {
> + compatible = "sophgo,cv1800b-reset";
> + reg = <0x03003000 0x1000>;
~~~~~~~
it should be 0x28
while please also note the 0x24 == SOFT_CPUAC_RSTN, does not compatible
with the reset-simple driver, but as it's not implemented nor used in this driver,
so we should be fine with this?
> + #reset-cells = <1>;
> + };
> +
> uart0: serial@4140000 {
> compatible = "snps,dw-apb-uart";
> reg = <0x04140000 0x100>;
> --
> 2.42.0
>
--
Yixun Lan (dlan)
Gentoo Linux Developer
GPG Key ID AABEFD55
