Commit 70d1e09ebf19 ("arm64: dts: qcom: sm6115: Use 64 bit addressing") converted all addresses to 64-bit addressing, but the ARMv7 memory mapped architected timer bindings expect sizes up to 32-bit. Keep 64-bit addressing but change size of memory mapping to 32-bit (size-cells=1) and adjust the ranges to match this. This fixes dtbs_check warnings like: sm6115p-lenovo-j606f.dtb: timer@f120000: #size-cells:0:0: 1 was expected Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- I hope I got the ranges right. Not tested on hardware. --- arch/arm64/boot/dts/qcom/sm6115.dtsi | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index 20dec687fa3b..ed6065ccd214 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -2559,54 +2559,54 @@ timer@f120000 { compatible = "arm,armv7-timer-mem"; reg = <0x0 0x0f120000 0x0 0x1000>; #address-cells = <2>; - #size-cells = <2>; - ranges; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x0 0x20000000>; clock-frequency = <19200000>; frame@f121000 { - reg = <0x0 0x0f121000 0x0 0x1000>, <0x0 0x0f122000 0x0 0x1000>; + reg = <0x0 0x0f121000 0x1000>, <0x0 0x0f122000 0x1000>; frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; }; frame@f123000 { - reg = <0x0 0x0f123000 0x0 0x1000>; + reg = <0x0 0x0f123000 0x1000>; frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; frame@f124000 { - reg = <0x0 0x0f124000 0x0 0x1000>; + reg = <0x0 0x0f124000 0x1000>; frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; frame@f125000 { - reg = <0x0 0x0f125000 0x0 0x1000>; + reg = <0x0 0x0f125000 0x1000>; frame-number = <3>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; frame@f126000 { - reg = <0x0 0x0f126000 0x0 0x1000>; + reg = <0x0 0x0f126000 0x1000>; frame-number = <4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; frame@f127000 { - reg = <0x0 0x0f127000 0x0 0x1000>; + reg = <0x0 0x0f127000 0x1000>; frame-number = <5>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; frame@f128000 { - reg = <0x0 0x0f128000 0x0 0x1000>; + reg = <0x0 0x0f128000 0x1000>; frame-number = <6>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; -- 2.34.1