Linux handles both versions, but bindings expect GPIO properties to
have 'gpios' suffix instead of 'gpio':
sa8155p-adp.dtb: pci@1c00000: Unevaluated properties are not allowed ('perst-gpio' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index e39de6596a1e..9bcdc485c73a 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1878,7 +1878,7 @@ pcie0: pci@1c00000 {
phys = <&pcie0_phy>;
phy-names = "pciephy";
- perst-gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+ perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
@@ -1972,7 +1972,7 @@ pcie1: pci@1c08000 {
phys = <&pcie1_phy>;
phy-names = "pciephy";
- perst-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+ perst-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
enable-gpio = <&tlmm 104 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
--
2.34.1
