Add interrupt support for ethernet phy subnode.
Add PB8 definition to macb0 pinctrl.
Signed-off-by: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts
index 83372c1f291b..c6fbdd29019f 100644
--- a/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts
+++ b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts
@@ -249,6 +249,8 @@ &macb0 {
ethernet-phy@0 {
reg = <0x0>;
+ interrupt-parent = <&pioB>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
};
};
@@ -353,6 +355,7 @@ AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */
AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */
AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
+ AT91_PIOB 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE /* PB8 IRQ GPIO */
AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */
};
--
2.42.0
