Re: [PATCH v2 3/4] hwmon: Add support for Amphenol ChipCap 2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/11/2023 16:37, Javier Carrasco wrote:
> The Amphenol ChipCap 2 is a capacitive polymer humidity and temperature
> sensor with an integrated EEPROM and minimum/maximum humidity alarms.
> 
> All device variants offer an I2C interface and depending on the part
> number, two different output modes:
> - CC2D: digital output
> - CC2A: analog (PDM) output
> 
> This driver adds support for the digital variant (CC2D part numbers),
> which is also divided into two subfamilies [1]:
> - CC2DXX: non-sleep measurement mode
> - CC2DXXS: sleep measurement mode

...

> +
> +static int cc2_probe(struct i2c_client *client)
> +{
> +	struct cc2_data *data;
> +	struct device *dev = &client->dev;
> +	enum cc2_ids chip;
> +	int ret;
> +
> +	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
> +		return -EOPNOTSUPP;
> +
> +	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	i2c_set_clientdata(client, data);
> +
> +	mutex_init(&data->i2c_lock);
> +	mutex_init(&data->alarm_lock);
> +
> +	data->client = client;
> +
> +	if (client->dev.of_node)
> +		chip = (uintptr_t)of_device_get_match_data(&client->dev);
> +	else
> +		chip = i2c_match_id(cc2_id, client)->driver_data;
> +
> +	data->config = &cc2_config[chip];
> +
> +	ret = cc2_request_ready_irq(data, dev);
> +	if (ret)
> +		return ret;
> +
> +	data->regulator = devm_regulator_get_optional(dev, "vdd");
> +	if (!IS_ERR(data->regulator)) {
> +		ret = cc2_retrive_alarm_config(data);
> +		if (ret)
> +			goto cleanup;
> +	} else {
> +		/* No access to EEPROM without regulator: no alarm control */
> +		goto dev_register;

Nothing improved here.

Do not send new version of patchset before discussion finishes.

> +	}
> +
> +	ret = cc2_request_alarm_irqs(data, dev);
> +	if (ret)
> +		goto cleanup;
> +
> +dev_register:
> +	data->hwmon = devm_hwmon_device_register_with_info(dev, client->name,
> +							   data, &cc2_chip_info,
> +							   NULL);
> +	if (IS_ERR(data->hwmon)) {
> +		ret = PTR_ERR(data->hwmon);
> +		goto cleanup;
> +	}
> +
> +	return 0;
> +
> +cleanup:
> +	if (cc2_disable(data))
> +		dev_dbg(dev, "Failed to disable device");
> +
> +	return dev_err_probe(dev, ret,
> +			     "Unable to register hwmon device\n");

Drop or move to each error path.



Best regards,
Krzysztof





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux