Re: [RFC PATCH] ARM: dts: stm32f469-disco: use the same 3v3 for SD and DSI nodes

[Alexandre TORGUE <alexandre.torgue@xxxxxxxxxxx>]

Hi Dario



On 10/23/23 13:00, Dario Binacchi wrote:
> Hello Alexandre,
>
> On Thu, Sep 14, 2023 at 10:57 AM Alexandre TORGUE
> <alexandre.torgue@xxxxxxxxxxx> wrote:
> > On 9/4/23 20:06, Dario Binacchi wrote:
> > > In the board schematic, the power supply for the SD card is the same 3.3
> > > volts used to power the LCD panel and other peripherals. By generalizing
> > > the name of the voltage regulator, it simplifies the device tree and makes
> > > it more readable.
> >
> > It makes sens as it is the same discret regulator (no pmic involved).
>
> I don't see it applied to linux-stm32/next. Is something missing?

ok, It is because the [RFC..] has been kept. Please resend by dropping it.

Cheers
Alex

> Thanks and regards,
> Dario
>
> > regards
> > Alex
> >
> > > Link: https://www.st.com/en/evaluation-tools/32f469idiscovery.html#cad-resources
> > > Signed-off-by: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
> > >
> > > ---
> > >
> > >    arch/arm/boot/dts/st/stm32f469-disco.dts | 15 ++++-----------
> > >    1 file changed, 4 insertions(+), 11 deletions(-)
> > >
> > > diff --git a/arch/arm/boot/dts/st/stm32f469-disco.dts b/arch/arm/boot/dts/st/stm32f469-disco.dts
> > > index cbbd521bf010..8a4f8ddd083d 100644
> > > --- a/arch/arm/boot/dts/st/stm32f469-disco.dts
> > > +++ b/arch/arm/boot/dts/st/stm32f469-disco.dts
> > > @@ -69,16 +69,9 @@ aliases {
> > >                serial0 = &usart3;
> > >        };
> > >
> > > -     mmc_vcard: mmc_vcard {
> > > +     vcc_3v3: vcc-3v3 {
> > >                compatible = "regulator-fixed";
> > > -             regulator-name = "mmc_vcard";
> > > -             regulator-min-microvolt = <3300000>;
> > > -             regulator-max-microvolt = <3300000>;
> > > -     };
> > > -
> > > -     vdd_dsi: vdd-dsi {
> > > -             compatible = "regulator-fixed";
> > > -             regulator-name = "vdd_dsi";
> > > +             regulator-name = "vcc_3v3";
> > >                regulator-min-microvolt = <3300000>;
> > >                regulator-max-microvolt = <3300000>;
> > >        };
> > > @@ -164,7 +157,7 @@ panel@0 {
> > >                compatible = "orisetech,otm8009a";
> > >                reg = <0>; /* dsi virtual channel (0..3) */
> > >                reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
> > > -             power-supply = <&vdd_dsi>;
> > > +             power-supply = <&vcc_3v3>;
> > >                status = "okay";
> > >
> > >                port {
> > > @@ -219,7 +212,7 @@ timer@2 {
> > >
> > >    &sdio {
> > >        status = "okay";
> > > -     vmmc-supply = <&mmc_vcard>;
> > > +     vmmc-supply = <&vcc_3v3>;
> > >        cd-gpios = <&gpiog 2 GPIO_ACTIVE_LOW>;
> > >        broken-cd;
> > >        pinctrl-names = "default", "opendrain";