Add ep pcie dtsi node for pcie1 controller found on sa8775p platform. It supports gen4 and x4 link width. Limiting the speed to Gen3 due to stability issues. Signed-off-by: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sa8775p.dtsi | 48 +++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi index 7eab458..acd7bd8 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -3732,6 +3732,54 @@ status = "disabled"; }; + pcie1_ep: pcie-ep@1c10000 { + compatible = "qcom,sa8775p-pcie-ep"; + reg = <0x0 0x01c10000 0x0 0x3000>, + <0x0 0x60000000 0x0 0xf20>, + <0x0 0x60000f20 0x0 0xa8>, + <0x0 0x60001000 0x0 0x4000>, + <0x0 0x60200000 0x0 0x100000>, + <0x0 0x01c13000 0x0 0x1000>, + <0x0 0x60005000 0x0 0x2000>; + reg-names = "parf", "dbi", "elbi", "atu", "addr_space", + "mmio", "dma"; + + clocks = <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>; + + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a"; + + interrupts = <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-names = "global", "doorbell", "dma"; + + interconnects = <&pcie_anoc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_1 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + dma-coherent; + + iommus = <&pcie_smmu 0x80 0x7f>; + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "core"; + power-domains = <&gcc PCIE_1_GDSC>; + phys = <&pcie1_phy>; + phy-names = "pciephy"; + max-link-speed = <3>; /* FIXME: Limiting the Gen speed due to stability issues */ + num-lanes = <4>; + + status = "disabled"; + }; + pcie1_phy: phy@1c14000 { compatible = "qcom,sa8775p-qmp-gen4x4-pcie-phy"; reg = <0x0 0x1c14000 0x0 0x4000>; -- 2.7.4