On sc7180 when the watchdog timer fires your logs get filled with: watchdog0: pretimeout event watchdog0: pretimeout event watchdog0: pretimeout event ... watchdog0: pretimeout event If you're using console-ramoops to debug crashes the above gets quite annoying since it blows away any other log messages that might have been there. The issue is that the "bark" interrupt (AKA the "pretimeout" interrupt) remains high until the watchdog is pet. Since we've got things configured as "level" triggered we'll keep getting interrupted over and over. Let's switch to edge triggered. Now we'll get one interrupt when the "bark" interrupt goes off we'll get one interrupt and won't get another one until the "bark" interrupt is cleared and asserts again. This matches how many older Qualcomm SoCs have things configured. Fixes: 28cc13e4060c ("arm64: dts: qcom: sc7180: Add watchdog bark interrupt") Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 11f353d416b4..c0365832c315 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -3576,7 +3576,7 @@ watchdog@17c10000 { compatible = "qcom,apss-wdt-sc7180", "qcom,kpss-wdt"; reg = <0 0x17c10000 0 0x1000>; clocks = <&sleep_clk>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>; }; timer@17c20000 { -- 2.42.0.869.gea05f2083d-goog