Re: [PATCH v2 2/4] Documentation: bindings: Add the regulator property to the sub-nodes AHCI bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi,

On 09-01-15 11:39, Gregory CLEMENT wrote:
It is now possible to use a regulator property for each port of the
AHCI controller.

Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
---
  Documentation/devicetree/bindings/ata/ahci-platform.txt | 9 ++++++---
  1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index 4ab09f2202d4..87416d71c758 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -37,9 +37,10 @@ Required properties when using sub-nodes:


  Sub-nodes required properties:
-- reg               : the port number
-- phys              : reference to the SATA PHY node
-
+- reg					: the port number
+And at least one of the following properties:
+- phys              	: reference to the SATA PHY node
+- target-port<n>-supply	: regulator for SATA target power for port <n>

  Examples:
          sata@ffe08000 {
@@ -68,10 +69,12 @@ With sub-nodes:
  		sata0: sata-port@0 {
  			reg = <0>;
  			phys = <&sata_phy 0>;
+			target-port0-supply = <&reg_sata0>;
  		};


I'm sorry, but I've to NAK this, I did not follow the regulator discussion.,
thinking that it was just about the use of some utility function vs diy or
some such, I had no idea this would impact the dt-binding.

The -port%d- bit is completely unnecessary from a dt pov. Devicetree is
supposed to be OS agnostic, we cannot make the dt-binding ugly just because
the regulator subsys in Linux does not provide the necessary functionality.

I'm afraid you will have to get back to the regulator subsys people and tell
them that we really need an of_regulator_get, so that we can tell the
regulator subsys we want a regulator from a specific of_node.

Please CC me when you re-open the discussion with the regulator people.

Regards,

Hans
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux