Document bindings for Marvell Aquantia PHY. The Marvell Aquantia PHY require a firmware to work correctly and there at least 3 way to load this firmware. Describe all the different way and document the binding "firmware-name" to load the PHY firmware from userspace. Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx> --- Changes v2: - Add DT patch .../bindings/net/marvell,aquantia.yaml | 123 ++++++++++++++++++ 1 file changed, 123 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/marvell,aquantia.yaml diff --git a/Documentation/devicetree/bindings/net/marvell,aquantia.yaml b/Documentation/devicetree/bindings/net/marvell,aquantia.yaml new file mode 100644 index 000000000000..f2248a81fbe7 --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell,aquantia.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/marvell,aquantia.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Aquantia Ethernet PHY + +maintainers: + - Christian Marangi <ansuelsmth@xxxxxxxxx> + +description: | + Marvell Aquantia Ethernet PHY require a firmware to be loaded to actually + work. + + This can be done and is implemented by OEM in 3 different way: + - Attached SPI directly to the PHY with the firmware. The PHY will + self load the firmware in the presence of this configuration. + - Dedicated partition on system NAND with firmware in it. NVMEM + subsystem will be used and the declared NVMEM cell will load + the firmware to the PHY using the PHY mailbox interface. + - Manually provided firmware using the sysfs interface. Firmware is + loaded using the PHY mailbox. + + If declared, nvmem will always take priority over fs provided firmware. + +allOf: + - $ref: ethernet-phy.yaml# + +properties: + compatible: + items: + - enum: + - ethernet-phy-id03a1.b445 + - ethernet-phy-id03a1.b460 + - ethernet-phy-id03a1.b4a2 + - ethernet-phy-id03a1.b4d0 + - ethernet-phy-id03a1.b4e0 + - ethernet-phy-id03a1.b5c2 + - ethernet-phy-id03a1.b4b0 + - ethernet-phy-id03a1.b662 + - ethernet-phy-id03a1.b712 + - ethernet-phy-id31c3.1c12 + - const: ethernet-phy-ieee802.3-c45 + + reg: + maxItems: 1 + + firmware-name: + description: specify the name of PHY firmware to load + + nvmem-cells: + description: phandle to the firmware nvmem cell + maxItems: 1 + + nvmem-cell-names: + const: firmware + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@0 { + /* Only needed to make DT lint tools work. Do not copy/paste + * into real DTS files. + */ + compatible = "ethernet-phy-id31c3.1c12", + "ethernet-phy-ieee802.3-c45"; + + reg = <0>; + firmware-name = "AQR-G4_v5.4.C-AQR_CIG_WF-1945_0x8_ID44776_VER1630.cld"; + }; + + ethernet-phy@1 { + /* Only needed to make DT lint tools work. Do not copy/paste + * into real DTS files. + */ + compatible = "ethernet-phy-id31c3.1c12", + "ethernet-phy-ieee802.3-c45"; + + reg = <0>; + nvmem-cells = <&aqr_fw>; + nvmem-cell-names = "firmware"; + }; + }; + + flash { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* ... */ + + partition@650000 { + compatible = "nvmem-cells"; + label = "0:ethphyfw"; + reg = <0x650000 0x80000>; + read-only; + #address-cells = <1>; + #size-cells = <1>; + + aqr_fw: aqr_fw@0 { + reg = <0x0 0x5f42a>; + }; + }; + + /* ... */ + + }; + }; -- 2.40.1
