Re: [PATCH v5 5/5] PCI: qcom: Add OPP support to scale performance state of power domain

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Sep 07, 2023 at 11:30:33AM +0530, Krishna chaitanya chundru wrote:
> While scaling the interconnect clocks based on PCIe link speed, it is also
> mandatory to scale the power domain performance state so that the SoC can
> run under optimum power conditions.
> 
> Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 58 ++++++++++++++++++++++++++++------
>  1 file changed, 49 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index ca6350b..1817e96 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -22,6 +22,7 @@
>  #include <linux/of.h>
>  #include <linux/of_gpio.h>
>  #include <linux/pci.h>
> +#include <linux/pm_opp.h>
>  #include <linux/pm_runtime.h>
>  #include <linux/platform_device.h>
>  #include <linux/phy/pcie.h>
> @@ -240,6 +241,7 @@ struct qcom_pcie {
>  	const struct qcom_pcie_cfg *cfg;
>  	struct dentry *debugfs;
>  	bool suspended;
> +	bool opp_supported;
>  };
>  
>  #define to_qcom_pcie(x)		dev_get_drvdata((x)->dev)
> @@ -1357,14 +1359,13 @@ static int qcom_pcie_icc_init(struct qcom_pcie *pcie)
>  	return 0;
>  }
>  
> -static int qcom_pcie_icc_update(struct qcom_pcie *pcie)
> +static int qcom_pcie_icc_opp_update(struct qcom_pcie *pcie)
>  {
>  	struct dw_pcie *pci = pcie->pci;
> +	struct dev_pm_opp *opp;
>  	u32 offset, status, bw;
>  	int speed, width;
> -
> -	if (!pcie->icc_mem)
> -		return 0;
> +	int ret;
>  
>  	offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
>  	status = readw(pci->dbi_base + offset + PCI_EXP_LNKSTA);
> @@ -1391,7 +1392,21 @@ static int qcom_pcie_icc_update(struct qcom_pcie *pcie)
>  		break;
>  	}
>  
> -	return icc_set_bw(pcie->icc_mem, 0, width * bw);
> +	if (pcie->opp_supported) {
> +		opp = dev_pm_opp_find_level_exact(pci->dev, speed);
> +		if (!IS_ERR(opp)) {
> +			ret = dev_pm_opp_set_opp(pci->dev, opp);
> +			if (ret)
> +				dev_err(pci->dev, "Failed to set opp: level %d ret %d\n",
> +					dev_pm_opp_get_level(opp), ret);
> +			dev_pm_opp_put(opp);
> +		}
> +	}
> +
> +	if (pcie->icc_mem)
> +		ret = icc_set_bw(pcie->icc_mem, 0, width * bw);

I think you should tie interconnect scaling with OPP as suggested by Viresh,
since you are updating both OPP and BW at the same time.

- Mani

> +
> +	return ret;
>  }
>  
>  static int qcom_pcie_link_transition_count(struct seq_file *s, void *data)
> @@ -1434,8 +1449,10 @@ static void qcom_pcie_init_debugfs(struct qcom_pcie *pcie)
>  static int qcom_pcie_probe(struct platform_device *pdev)
>  {
>  	const struct qcom_pcie_cfg *pcie_cfg;
> +	unsigned long max_level = INT_MAX;
>  	struct device *dev = &pdev->dev;
>  	struct qcom_pcie *pcie;
> +	struct dev_pm_opp *opp;
>  	struct dw_pcie_rp *pp;
>  	struct resource *res;
>  	struct dw_pcie *pci;
> @@ -1506,6 +1523,27 @@ static int qcom_pcie_probe(struct platform_device *pdev)
>  	if (ret)
>  		goto err_pm_runtime_put;
>  
> +	/* OPP table is optional */
> +	ret = devm_pm_opp_of_add_table(dev);
> +	if (ret && ret != -ENODEV) {
> +		dev_err_probe(dev, ret, "Failed to add OPP table\n");
> +		goto err_pm_runtime_put;
> +	}
> +
> +	/* vote for max level in the opp table if opp table is present */
> +	if (ret != -ENODEV) {
> +		opp = dev_pm_opp_find_level_floor(dev, &max_level);
> +		if (!IS_ERR(opp)) {
> +			ret = dev_pm_opp_set_opp(dev, opp);
> +			if (ret)
> +				dev_err_probe(pci->dev, ret,
> +					      "Failed to set opp: level %d\n",
> +					      dev_pm_opp_get_level(opp));
> +			dev_pm_opp_put(opp);
> +		}
> +		pcie->opp_supported = true;
> +	}
> +
>  	ret = pcie->cfg->ops->get_resources(pcie);
>  	if (ret)
>  		goto err_pm_runtime_put;
> @@ -1524,9 +1562,9 @@ static int qcom_pcie_probe(struct platform_device *pdev)
>  		goto err_phy_exit;
>  	}
>  
> -	ret = qcom_pcie_icc_update(pcie);
> +	ret = qcom_pcie_icc_opp_update(pcie);
>  	if (ret)
> -		dev_err(dev, "failed to update interconnect bandwidth: %d\n",
> +		dev_err(dev, "failed to update interconnect bandwidth/opp: %d\n",
>  			ret);
>  
>  	if (pcie->mhi)
> @@ -1575,6 +1613,8 @@ static int qcom_pcie_suspend_noirq(struct device *dev)
>  	 */
>  	if (!dw_pcie_link_up(pcie->pci)) {
>  		qcom_pcie_host_deinit(&pcie->pci->pp);
> +		if (pcie->opp_supported)
> +			dev_pm_opp_set_opp(dev, NULL);
>  		pcie->suspended = true;
>  	}
>  
> @@ -1594,9 +1634,9 @@ static int qcom_pcie_resume_noirq(struct device *dev)
>  		pcie->suspended = false;
>  	}
>  
> -	ret = qcom_pcie_icc_update(pcie);
> +	ret = qcom_pcie_icc_opp_update(pcie);
>  	if (ret)
> -		dev_err(dev, "failed to update interconnect bandwidth: %d\n",
> +		dev_err(dev, "failed to update interconnect bandwidth/opp: %d\n",
>  			ret);
>  
>  	return 0;
> -- 
> 2.7.4
> 

-- 
மணிவண்ணன் சதாசிவம்




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux