On 31.10.2023 11:48, Nikita Travkin wrote:
> Konrad Dybcio писал(а) 31.10.2023 15:06:
>> On 31.10.2023 08:20, Nikita Travkin wrote:
>>> Konrad Dybcio писал(а) 31.10.2023 02:48:
>>>> On 27.10.2023 16:42, Nikita Travkin wrote:
>>>>> When initially added, a mistake was made in the definition of the codec.
>>>>>
>>>>> Despite the fact that the DMIC line is connected on the side of the
>>>>> codec chip, and relevant passive components, including 0-ohm resistors
>>>>> connecting the dmics, are present, the dmic line is still cut in
>>>>> another place on the board, which was overlooked.
>>>>>
>>>>> Correct this by replacing the dmic configuration with a comment
>>>>> describing this hardware detail.
>>>>>
>>>>> While at it, also add missing regulators definitions. This is not a
>>>>> functional change as all the relevant regulators were already added via
>>>>> the other rail supplies.
>>>>>
>>>>> Fixes: 4a9f8f8f2ada ("arm64: dts: qcom: Add Acer Aspire 1")
>>>>> Signed-off-by: Nikita Travkin <nikita@xxxxxxx>
>>>>> ---
>>>>> arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts | 17 +++++++++++++++--
>>>>> 1 file changed, 15 insertions(+), 2 deletions(-)
>>>>>
>>>>> diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
>>>>> index cfde8cd47107..00b442696618 100644
>>>>> --- a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
>>>>> +++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
>>>>> @@ -209,9 +209,22 @@ alc5682: codec@1a {
>>>>> AVDD-supply = <&vreg_l15a_1p8>;
>>>>> MICVDD-supply = <®_codec_3p3>;
>>>>> VBAT-supply = <®_codec_3p3>;
>>>>> + DBVDD-supply = <&vreg_l15a_1p8>;
>>>>> + LDO1-IN-supply = <&vreg_l15a_1p8>;
>>>>> +
>>>>> + /*
>>>>> + * NOTE: The board has a path from this codec to the
>>>>> + * DMIC microphones in the lid, however some of the option
>>>>> + * resistors are absent and the microphones are connected
>>>>> + * to the SoC instead.
>>>> Would that not also require more DT changes and maybe UCM?
>>>
>>> I don't think I had any other descriptions to support the dmic in
>>> the initial set (first audio support for this board is 3/3 here)
>>> and there is no upstream UCM yet - I will probably hold it off until
>>> I get vamacro and dmic on it working.
>> I was told that VAMACRO is "the easiest thing possible to get going"
>> (paraphrasing), did you go through something like this sequence [1]?
>>
>
> The problem is that no one introduced it for sc7180 - it's not
> in the dtsi. And so isn't the lpass-tlmm I'd need...
>
> So the set of due changes per my understanding is like:
>
> - Add va-macro to sc7180 (need new compatible/fallback)
> - Add relevant clocks for it (seems to be firmware backed, so easy?)
yes
> - Add lpass-tlmm (it seems like we add a new driver for each soc
> even if they are same? Are they same?)
there are rare cases when it's identical
> - Add va macro dma dais to the asoc boardfile (trivial)
y
> - Finally, add the dmic to the board dts and enable in the UCM
> (also trivial)
y
> So I decided to follow the "release early, release often" and
> only introduce partial sound for now, following it up with
> all above later.
Sure that makes sense, just wanted to make sure you know about this
Konrad
>
>> https://git.linaro.org/people/srinivas.kandagatla/alsa-ucm-conf.git/tree/ucm2/codecs/qcom-lpass/va-macro/DMIC0EnableSeq.conf?h=x13s&id=244979b03f5b9284e6a68eae6f9995f6ac735be8
>
> Thanks, this is useful to have, I was indeed looking at
> x13s for dmic/vamacro example after I realized my board
> tricked me and it's not how trogdor does it...
>
> Nikita
