On 31-10-23, 12:41, Varadarajan Narayanan wrote: > This patch series aims to enable cpufreq for IPQ5332 and IPQ9574. > For IPQ5332, a minor enhancement to Stromer Plus ops and a safe > source switch is needed before cpu freq can be enabled. > > These are also included in this series. Posting this as a single > series. Please let me know if this is not correct, will split in > the subsequent revisions. > > Passed the following DT related validations > make W=1 ARCH=arm64 -j16 DT_CHECKER_FLAGS='-v -m' dt_binding_check DT_SCHEMA_FILES=qcom > make W=1 ARCH=arm64 -j16 CHECK_DTBS=y DT_SCHEMA_FILES=qcom dtbs_check > > For IPQ5332: > ~~~~~~~~~~~ > * This patch series introduces stromer plus ops which > builds on stromer ops and implements a different > set_rate and determine_rate. > > A different set_rate is needed since stromer plus PLLs > do not support dynamic frequency scaling. To switch > between frequencies, we have to shut down the PLL, > configure the L and ALPHA values and turn on again. So > introduce the separate set of ops for Stromer Plus PLL. > > * Update ipq_pll_stromer_plus to use clk_alpha_pll_stromer_plus_ops > instead of clk_alpha_pll_stromer_ops. > > * Set 'l' value to a value that is supported on all SKUs. > > * Provide safe source switch for a53pll > > * Include IPQ5332 in cpufreq nvmem framework > > * Add OPP details to device tree > > For IPQ9574: > ~~~~~~~~~~~ > * Include IPQ9574 in cpufreq nvmem framework > > * Add OPP details to device tree > > Removed 2 patches from V1 as they have been merged > * dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ5332 > * dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ9574 > > v4: Included a patch to fix 'kernel test robot' build error -- > https://lore.kernel.org/r/202310181650.g8THtfsm-lkp@xxxxxxxxx/ > > v5: Use devm_clk_notifier_register > Merge IPQ53xx and IPQ95xx cases with APQ8096 for speed bin selection > Add reviewed by tags > > v6: Except these 2 patches, rest have been merged... > Rebased these to latest top as they don't apply cleanly > (https://lore.kernel.org/linux-arm-msm/20231025062508.vccrmkem45p3fnwe@vireshk-i7/) > > Varadarajan Narayanan (2): > cpufreq: qti: Enable cpufreq for ipq53xx > cpufreq: qti: Introduce cpufreq for ipq95xx > > drivers/cpufreq/cpufreq-dt-platdev.c | 2 ++ > drivers/cpufreq/qcom-cpufreq-nvmem.c | 12 ++++++++++++ > 2 files changed, 14 insertions(+) Applied. Thanks. -- viresh
