Add ep pcie dtsi node for pcie0 controller found on sa8775p platform. It supports gen4 and x2 link width. Limiting the speed to Gen3 due to stability issues. Signed-off-by: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sa8775p.dtsi | 46 +++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi index 13dd44d..7eab458 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -3586,6 +3586,52 @@ status = "disabled"; }; + pcie0_ep: pcie-ep@1c00000 { + compatible = "qcom,sa8775p-pcie-ep"; + reg = <0x0 0x01c00000 0x0 0x3000>, + <0x0 0x40000000 0x0 0xf20>, + <0x0 0x40000f20 0x0 0xa8>, + <0x0 0x40001000 0x0 0x4000>, + <0x0 0x40200000 0x0 0x100000>, + <0x0 0x01c03000 0x0 0x1000>, + <0x0 0x40005000 0x0 0x2000>; + reg-names = "parf", "dbi", "elbi", "atu", "addr_space", + "mmio", "dma"; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>; + + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a"; + + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 630 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-names = "global", "doorbell", "dma"; + + interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + iommus = <&pcie_smmu 0x0000 0x7f>; + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "core"; + power-domains = <&gcc PCIE_0_GDSC>; + phys = <&pcie0_phy>; + phy-names = "pciephy"; + max-link-speed = <3>; /* FIXME: Limiting the Gen speed due to stability issues */ + num-lanes = <2>; + + status = "disabled"; + }; + pcie0_phy: phy@1c04000 { compatible = "qcom,sa8775p-qmp-gen4x2-pcie-phy"; reg = <0x0 0x1c04000 0x0 0x2000>; -- 2.7.4