The BCM59056 supported by the bcm590xx driver is similar to the
BCM59054 MFD. Add a compatible for it in the driver, in preparation
for adding support for this chip in the bcm590xx regulator driver.
Signed-off-by: Artur Weber <aweber.kernel@xxxxxxxxx>
---
drivers/mfd/bcm590xx.c | 5 ++++-
include/linux/mfd/bcm590xx.h | 7 +++++++
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/bcm590xx.c b/drivers/mfd/bcm590xx.c
index 92eede9a5e61..f5c5fa97ca9a 100644
--- a/drivers/mfd/bcm590xx.c
+++ b/drivers/mfd/bcm590xx.c
@@ -50,6 +50,8 @@ static int bcm590xx_i2c_probe(struct i2c_client *i2c_pri)
bcm590xx->dev = &i2c_pri->dev;
bcm590xx->i2c_pri = i2c_pri;
+ bcm590xx->device_type = (unsigned int)of_device_get_match_data(bcm590xx->dev);
+
bcm590xx->regmap_pri = devm_regmap_init_i2c(i2c_pri,
&bcm590xx_regmap_config_pri);
if (IS_ERR(bcm590xx->regmap_pri)) {
@@ -91,7 +93,8 @@ static int bcm590xx_i2c_probe(struct i2c_client *i2c_pri)
}
static const struct of_device_id bcm590xx_of_match[] = {
- { .compatible = "brcm,bcm59056" },
+ { .compatible = "brcm,bcm59054", .data = (void *)BCM59054_TYPE },
+ { .compatible = "brcm,bcm59056", .data = (void *)BCM59056_TYPE },
{ }
};
MODULE_DEVICE_TABLE(of, bcm590xx_of_match);
diff --git a/include/linux/mfd/bcm590xx.h b/include/linux/mfd/bcm590xx.h
index 6b8791da6119..ed0d8be6387c 100644
--- a/include/linux/mfd/bcm590xx.h
+++ b/include/linux/mfd/bcm590xx.h
@@ -13,12 +13,19 @@
#include <linux/i2c.h>
#include <linux/regmap.h>
+/* device types */
+enum {
+ BCM59054_TYPE,
+ BCM59056_TYPE,
+};
+
/* max register address */
#define BCM590XX_MAX_REGISTER_PRI 0xe7
#define BCM590XX_MAX_REGISTER_SEC 0xf0
struct bcm590xx {
struct device *dev;
+ unsigned int device_type;
struct i2c_client *i2c_pri;
struct i2c_client *i2c_sec;
struct regmap *regmap_pri;
--
2.42.0
