On 30/10/2023 10:58, Pankaj Gupta wrote: > Added support for NXP secure enclave called EdgeLock Enclave > firmware (se-fw) for imx8ulp-evk. > > Signed-off-by: Pankaj Gupta <pankaj.gupta@xxxxxxx> > --- > arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 10 +++++++++- > 1 file changed, 9 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi > index 946f2b68d16f..7b66de3a392d 100644 > --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi > @@ -152,7 +152,7 @@ sosc: clock-sosc { > #clock-cells = <0>; > }; > > - sram@2201f000 { > + sram0: sram@2201f000 { > compatible = "mmio-sram"; > reg = <0x0 0x2201f000 0x0 0x1000>; > > @@ -578,4 +578,12 @@ gpiod: gpio@2e200080 { > gpio-ranges = <&iomuxc1 0 0 24>; > }; > }; > + > + ele_fw2: se-fw2 { Node names should be generic. See also an explanation and list of examples (not exhaustive) in DT specification: https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation Best regards, Krzysztof