On Thu, Oct 26, 2023 at 02:28:41AM -0700, Kris Chaplin wrote: > Add YAML DT schema for the AMD AXI w1 host IP. > > This hardware guarantees protocol timing for driving off-board devices such > as thermal sensors, proms, etc using the 1wire protocol. > > Add MAINTAINERS entry for DT schema. > > Co-developed-by: Thomas Delev <thomas.delev@xxxxxxx> > Signed-off-by: Thomas Delev <thomas.delev@xxxxxxx> > Signed-off-by: Kris Chaplin <kris.chaplin@xxxxxxx> > --- > .../bindings/w1/amd,axi-1wire-host.yaml | 44 +++++++++++++++++++ > MAINTAINERS | 7 +++ > 2 files changed, 51 insertions(+) > create mode 100644 Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml > > diff --git a/Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml b/Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml > new file mode 100644 > index 000000000000..ef70fa2c0c5d > --- /dev/null > +++ b/Documentation/devicetree/bindings/w1/amd,axi-1wire-host.yaml > @@ -0,0 +1,44 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/w1/amd,axi-1wire-host.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: AMD AXI 1-wire bus host for programmable logic > + > +maintainers: > + - Kris Chaplin <kris.chaplin@xxxxxxx> > + > +properties: > + compatible: > + const: amd,axi-1wire-host Is there a device side implementation? I can't really imagine that 1-wire would ever be implemented as firmware on the device side given its limited nature. So adding 'host' doesn't make this any more specific. Rob