Add the bindings and driver changes for DSP support on the SM8650 platform in order to enable the aDSP, cDSP and MPSS subsystems to boot. Compared to SM8550, where SM8650 uses the same dual firmware files, (dtb file and main firmware) the memory zones requirement has changed: - cDSP: now requires 2 memory zones to be configured as shared between the cDSP and the HLOS subsystem - MPSS: In addition to the memory zone required for the SM8550 MPSS, another one is required to be configured for MPSS usage only. In order to handle this and avoid code duplication, the region_assign_* code patch has been made more generic and is able handle multiple DSP-only memory zones (for MPSS) or DSP-HLOS shared memory zones (cDSP) in the same region_assign functions. Dependencies: None For convenience, a regularly refreshed linux-next based git tree containing all the SM8650 related work is available at: https://git.codelinaro.org/neil.armstrong/linux/-/tree/topic/sm8650/upstream/integ Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx> --- Changes in v2: - Fixed sm8650 entries in allOf:if:then to match Krzysztof's comments - Collected reviewed-by on patch 3 - Link to v1: https://lore.kernel.org/r/20231025-topic-sm8650-upstream-remoteproc-v1-0-a8d20e4ce18c@xxxxxxxxxx --- Neil Armstrong (3): dt-bindings: remoteproc: qcom,sm8550-pas: document the SM8650 PAS remoteproc: qcom: pas: make region assign more generic remoteproc: qcom: pas: Add SM8650 remoteproc support .../bindings/remoteproc/qcom,sm8550-pas.yaml | 44 +++++- drivers/remoteproc/qcom_q6v5_pas.c | 152 ++++++++++++++++----- 2 files changed, 159 insertions(+), 37 deletions(-) --- base-commit: fe1998aa935b44ef873193c0772c43bce74f17dc change-id: 20231016-topic-sm8650-upstream-remoteproc-66a87eeb6fee Best regards, -- Neil Armstrong <neil.armstrong@xxxxxxxxxx>
