Hi Laurent, On Fri, Oct 27, 2023 at 03:46:34PM +0300, Laurent Pinchart wrote: > > > > > + port: > > > > > + $ref: /schemas/graph.yaml#/$defs/port-base > > > > > + additionalProperties: false > > > > > + > > > > > + properties: > > > > > + endpoint: > > > > > + $ref: /schemas/media/video-interfaces.yaml# > > > > > + unevaluatedProperties: false > > > > > + > > > > > + properties: > > > > > + data-lanes: > > > > > + description: > > > > > + This property is for lane reordering between the THP7312 and the > > > > > + SoC. The sensor supports either two-lane, or four-lane operation. > > > > > + If this property is omitted four-lane operation is assumed. For > > > > > + two-lane operation the property must be set to <1 2>. > > > > > > > > How are link frequencies determined by the device? > > > > > > The link frequency is not under direct control of the host. There are > > > registers to select between mode presets, each of them producing a > > > particular link frequency. > > > > If they are known, one could only allow setting the modes with known-good > > link requencies. This could be added later on, too, affecting systems with > > link-frequencies set. I guess you could also add it now, as optional. > > I vote for later :-) > > > Where's the link frequency information available? In documentation or in > > on the firmware API? > > In the documentation (which is not public I'm afraid). Could you add this information in the driver? Co-incidentally, the driver is lacking the LINK_FREQ control. It should be added. -- Regards, Sakari Ailus
