[PATCH 6/7] arm64: dts: ti: iot2050: Add node for SPI devices on Arduino connector

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>

This interface is normally driven by userspace on the IOT2050.

Signed-off-by: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index 53bd296ba310..bc77ba58d8f9 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -1180,6 +1180,12 @@ &mcu_spi0 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	ti,pindir-d0-out-d1-in;
+
+	spidev@0 {
+		compatible = "siemens,iot2050-arduino-spi";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
 };
 
 &tscadc1 {
-- 
2.35.3





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux