Re: [PATCH v5 1/2] dt-bindings: i2c: mv64xxx: add bus-reset-gpios property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 27/10/2023 11:09, Wolfram Sang wrote:
> On Fri, Oct 27, 2023 at 04:31:03PM +1300, Chris Packham wrote:
>> Add bus-reset-gpios and bus-reset-duration-us properties to the
>> marvell,mv64xxx-i2c binding. These can be used to describe hardware
>> where a common reset GPIO is connected to all downstream devices on and
>> I2C bus. This reset will be asserted then released before the downstream
>> devices on the bus are probed.
>>
>> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> 
> Krzysztof, are you fine with this change?

Actually no. NAK.

Not because of the naming, but because the new name triggered some new
paths in my brain which brought the point - this is old problem of power
sequencing of children.

I believe this must be solved in more generic way. First - generic for
all I2C devices. Second - generic also matching other buses/subsystems,
which have similar problem. We did it for USB (onboard USB), MMC
(unloved MMC power sequence) and now we are doing it for PCIe and few
others (Cc: Abel)

https://lpc.events/event/17/contributions/1507/

Current solution is heavily limited. What about regulators? What about
buses having 2 reset lines (still the same bus)? What about sequence?

Best regards,
Krzysztof





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux